Mail Index
[Prev Page][Next Page]
- Re: Selfish PCI Cards
- From: Neal Palmer <neal@dinigroup.com>
- Selfish PCI Cards
- From: GStevens@ontrack.com
- Implementing a PCI bus using FPGA logic
- From: kaslauterbeck@firstenergycorp.com
- Re: Is is possible to receive a cheep SubVendorID?
- From: Duane Clark <dclark@akamail.com>
- PCI reference work
- From: "Andy Vercauteren" <Andy.Vercauteren@egemin.be>
- Re: timing question
- From: Olaf Reichenbaecher <Olaf.Reichenbaecher@sci-worx.com>
- Re: timing question
- From: Neal Palmer <neal@dinigroup.com>
- bus simulation in PSpice
- From: "Frazee, Walt" <Walt@VistaControls.com>
- Soft reset question
- From: Goran Grbic <grbic@mosaid.com>
- RE: timing question
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- RE: How can I extend the number of loads/slots ?
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- RE: timing question
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- How can I extend the number of loads/slots ?
- From: Noam Arzy <noam@teracross.com>
- Re: timing question
- From: "Sachin Kadu" <sachin@controlnet.co.in>
- RE: Compact PCI Extender cards
- From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
- Compact PCI Extender cards
- From: Mark.Preibisius@conexant.com
- timing question
- From: Vijay Chougule <vchougule@yahoo.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- Memory address range & PCI programming
- From: brad yu <bradyu2001@yahoo.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- Thanx all
- From: "Gaurav" <gaurav@mds.memec.co.in>
- Re: Real-world disconnects
- From: Gérard Roudier <groudier@club-internet.fr>
- RE: 64 Bit Base Address Register
- From: Gérard Roudier <groudier@club-internet.fr>
- Re: Master Abort.
- From: "Gaines Mcmillan/Raleigh/IBM" <gaines@us.ibm.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- RE: Is is possible to receive a cheep SubVendorID?
- From: Keith Jasinski <jasinski@mortara.com>
- Re: 64 Bit Base Address Register
- From: Olaf Reichenbaecher <Olaf.Reichenbaecher@sci-worx.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Shepard Bob-G14751 <Bob.Shepard@motorola.com>
- Re: Real-world disconnects
- From: Marco Brambilla <marco-tpa.brambilla@st.com>
- Re:PCI/Gigabit Ethernet chipsets
- getting started
- From: "Gaurav" <gaurav@mds.memec.co.in>
- RE: How to determine the speed of the PCI bus attached?
- From: lecos@samsung.co.kr
- RE: 64 Bit Base Address Register
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- Re:PCI/Gigabit Ethernet chipsets
- From: Eric_Drozdov@alliedtelesyn.com (Eric Drozdov)
- RE: How to determine the speed of the PCI bus attached?
- From: Gérard Roudier <groudier@club-internet.fr>
- PCI/Gigabit Ethernet chipsets
- From: Marc Reviel <mreviel@powerlogix.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- RE: 64 Bit Base Address Register
- From: Gérard Roudier <groudier@club-internet.fr>
- Re: Real-world disconnects
- From: Gérard Roudier <groudier@club-internet.fr>
- RE: PCI real time video to disk
- From: Dave New <NewD@esi.com>
- RE: 64 Bit Base Address Register
- From: Richard Walter <rwalter@Brocade.COM>
- RE: 64 Bit Base Address Register
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- PCI real time video to disk
- From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
- Master Abort.
- From: Christophe.LINDHEIMER@tcc.thomson-csf.com
- Re: Real-world disconnects
- From: Marco Brambilla <marco-tpa.brambilla@st.com>
- Re: Real-world disconnects
- From: Patrick Maupin <pmaupin@jump.net>
- RE: How to determine the speed of the PCI bus attached?
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- 64 Bit Base Address Register
- From: Olaf Reichenbaecher <Olaf.Reichenbaecher@sci-worx.com>
- Re: Real-world disconnects
- From: Marco Brambilla <marco-tpa.brambilla@st.com>
- Re: Real-world disconnects
- From: Marco Brambilla <marco-tpa.brambilla@st.com>
- How to determine the speed of the PCI bus attached?
- From: brad yu <bradyu2001@yahoo.com>
- RE: Advantages of 3.3V Signaling??
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Re: Real-world disconnects
- From: Patrick Maupin <pmaupin@jump.net>
- Re: Real-world disconnects
- From: Gérard Roudier <groudier@club-internet.fr>
- Re: Real-world disconnects
- From: Patrick Maupin <pmaupin@jump.net>
- Re: Real-world disconnects
- From: Duane Clark <dclark@akamail.com>
- RE: Real-world disconnects
- From: "James Lam(SC)" <james.lam@o2micro.com>
- Advantages of 3.3V Signaling??
- From: Eric_Drozdov@alliedtelesyn.com (Eric Drozdov)
- Re: Real-world disconnects
- From: Patrick Maupin <pmaupin@jump.net>
- Re: North bridge functions
- From: Patrick Maupin <pmaupin@jump.net>
- Re: North bridge functions
- From: Marco Brambilla <marco-tpa.brambilla@st.com>
- Real-world disconnects
- From: Marco Brambilla <marco-tpa.brambilla@st.com>
- North bridge functions
- From: "Wood, Stephen" <swood07@harris.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: "Jim McManus" <Jim.McManus@xilinx.com>
- Re: Is is possible to receive a cheep SubVendorID?
- Re: Is is possible to receive a cheep SubVendorID?
- From: "Jim McManus" <Jim.McManus@xilinx.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- RE: Value Message from PCI-SIG Chairman
- From: Dave New <NewD@esi.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: "Theo Lindebaum" <t.lindebaum@wavecom.ch>
- Re: Is is possible to receive a cheep SubVendorID?
- From: "Meindert Kuipers" <m_kuipers@wxs.nl>
- Re: Is is possible to receive a cheep SubVendorID?
- From: "F.Pitzl" <F.Pitzl@GMX.DE>
- Re: Value Message from PCI-SIG Chairman
- From: Duane Clark <dclark@akamail.com>
- RE: DRAM-Controller
- From: Matevz Langus <langus@iskratel.si>
- Re: DRAM-Controller
- From: Simon Lau <simon@eurekatech.com>
- Value Message from PCI-SIG Chairman
- From: Roger Tipley <tipley@yahoo.com>
- RE: archive
- From: Daniel Weaver <dan.weaver@znyx.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Duane Clark <dclark@akamail.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Duane Clark <dclark@akamail.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- Re: DRAM-Controller
- From: Patrick Maupin <pmaupin@jump.net>
- RE: archive
- From: Dave New <NewD@esi.com>
- RE: archive
- From: Dave New <NewD@esi.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: "Michael Mazlin" <michael_mazlin@hotmail.com>
- archive
- From: "Wood, Stephen" <swood07@harris.com>
- DRAM-Controller
- From: Thomas Schmidt <tschmidt2@gmx.de>
- Test(Null)
- From: "Tan, Wei (CRD, CRD)" <Wei.Tan@geahk.ge.com>
- AD[1:0], ADB (PCI-X Protocol Query)
- From: Mario da Costa <mario@controlnet.co.in>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Dan Mick <Dan.Mick@West.Sun.COM>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Patrick Maupin <pmaupin@jump.net>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Duane Clark <dclark@akamail.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: "Michael Mazlin" <michael_mazlin@hotmail.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Richard Walter <rwalter@Brocade.COM>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- RE: PCI memory read line (MRL)
- From: Dave New <NewD@esi.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Marco Brambilla <marco-tpa.brambilla@st.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- PCI memory read line (MRL)
- From: Max Lyadvinsky <ledmax@telecom.sins.ru>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Marco Brambilla <marco-tpa.brambilla@st.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: anthony@cs.york.ac.uk
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- Re: Is is possible to receive a cheep SubVendorID?
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- SBUS adapter
- From: David Boling <David.Boling@vmic.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: "Brian Small" <small@quicklogic.com>
- RE: Is is possible to receive a cheep SubVendorID?
- From: Dave New <NewD@esi.com>
- Is is possible to receive a cheep SubVendorID?
- From: "F.Pitzl" <F.Pitzl@GMX.DE>
- PCI block mode transfer
- From: Max Lyadvinsky <ledmax@telecom.sins.ru>
- RE: PCI probe for Tektronics
- From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
- PCI probe for Tektronics
- From: Tony Clark <Tony.Clark@mn.efi.com>
- Re: about protocol
- From: Neal Palmer <neal@dinigroup.com>
- Re: PCI-PCI bridge
- From: "John D. Cappello" <jcappello@optimal-design.com>
- PCI-PCI bridge
- From: "Jim Chan" <tan264@hotmail.com>
- Re: about protocol
- From: Kenneth_Chi-Yiu WONG <kcwong@ecr.mu.oz.au>
- PCI SIG document questions
- Re: PCI 2.2 protocol question (FRAME# and Latency Timer timeout)
- From: Gérard Roudier <groudier@club-internet.fr>
- PCI Resource FAQ For Newbies RE: PCI question
- From: Lame Brooks-G14738 <brooks.lame@motorola.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- please remove me
- From: Claire Prymus <claire@coremedia.net>
- Re: about protocol
- From: Mike Dini <mdini@dinigroup.com>
- REMOVE
- From: "Daryl White" <dwhite@altaworks.com>
- Re: PCI 2.2 protocol question (FRAME# and Latency Timer timeout)
- From: "Weng Tianxiang" <wtx@umem.com>
- PCI question
- From: "Neumann, Doug N (DynCorp)" <NeumannDN@navair.navy.mil>
- AW: Byte Wide Devices on PCI Bus
- From: "Preissner, Joachim" <joachim.preissner@actel.com>
- Re: PCI 2.2 protocol question (FRAME# and Latency Timer timeout)
- From: "Sachin Kadu" <sachin@controlnet.co.in>
- about protocol
- From: "Sachin Kadu" <sachin@controlnet.co.in>
- Re: Byte Wide Devices on PCI Bus
- From: "Richard Iachetta/Austin/IBM" <iachetta@us.ibm.com>
- please remove us
- From: "JODY" <jody@sscd.com>
- Byte Wide Devices on PCI Bus
- From: "Markou, Pete" <Pete.Markou@GD-CS.COM>
- pci socket hspice models
- From: "Matt (boomer) Russell" <boomer@lsil.com>
- Re: PCI 2.2 protocol question (FRAME# and Latency Timer timeout)
- From: "Weng Tianxiang" <wtx@umem.com>
- Re: Fwd: PCI 2.2 protocol question (FRAME# and Latency Timer timeout)
- From: "Richard Iachetta/Austin/IBM" <iachetta@us.ibm.com>
- Fwd: PCI 2.2 protocol question (FRAME# and Latency Timer timeout)
- From: Simi Valecha <simi_valecha@yahoo.com>
- Re: Address roll over !!
- From: "Richard Iachetta/Austin/IBM" <iachetta@us.ibm.com>
- Address roll over !!
- From: "Amit Shah" <Amit@dcmtech.com>
- Re: Reset of a PCI card in a rack.
- From: "Peter Marek" <peter.marek@marekmicro.de>
- RE: Reset of a PCI card in a rack.
- From: Shepard Bob-G14751 <Bob.Shepard@motorola.com>
- Reset of a PCI card in a rack.
- From: Christophe.LINDHEIMER@tcc.thomson-csf.com
- melrun.org
- Receive a FREE vacation!!!!!
- From: tgeorge25@melrun.org
- Semiconductor Startup Newsletter
- From: Steve Szirom <szirom@insidechips.com>
- Re: PCI queries ( protocols + ASIC related )
- From: Neal Palmer <neal@dinigroup.com>
- PCI queries ( protocols + ASIC related )
- From: "Ajit Madhekar" <ajit@controlnet.co.in>
- RE: Question about the initialization of configuration registers
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- RE: Question about the initialization of configuration registers
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- Re: PCI Multimedia Sound Device
- From: Ivor Bowden <ivor@peritek.com>
- RE: PCI Multimedia Sound Device
- From: "Fockler, Joe" <jfockler@ti.com>
- PCI Multimedia Sound Device
- From: Weetle32500@aol.com
- Re: PCI 66MHz mode
- From: Neal Palmer <neal@dinigroup.com>
- PCI 66MHz mode
- From: Goran Grbic <grbic@mosaid.com>
- Can anyone spare 35 AMCC 5920's?
- From: Mike Dini <mdini@dinigroup.com>
- 5V vs. 3.3V
- From: "Andrew Krenz" <a.krenz@aristoslogic.com>
- RE: Information on Ethernet PHY's
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- No Subject
- From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
- Information on Ethernet PHY's
- From: Eric_Drozdov@alliedtelesyn.com (Eric Drozdov) (by way of Daniel Weaver <dan.weaver@znyx.com>)
- Re: JTAG in expansion slots
- From: David Cary <d.cary@ieee.org>
- RE: PCI 5V signal
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- CPCI extenders
- From: Michael_Kharkover@amat.com
- CPCI extenders
- From: Michael_Kharkover@amat.com
- znyx.com off the air for several days
- From: Alan Deikman <Alan.Deikman@znyx.com>
- PCI debug module
- From: "Weng Tianxiang" <wtx@umem.com>
- PCI Total Available Market
- From: Jay Rann <rj007mail@yahoo.com>
- RE: device driver for S5933
- From: Dave New <NewD@esi.com>
- Question
- From: Peter Britton <peter.britton@motion-media.com>
- device driver for S5933
- From: "Jim Chan" <tan264@hotmail.com>
- PCI 5V signal
- From: Sek_Shiang TAN <sstan@ecr.mu.oz.au>
- Question for PCI SIG on RF connector
- From: Tramontano Michael-LMT004 <Michael.Tramontano@motorola.com>
- RE: Question about PCI 2.2 spec and 3.3V signaling
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Question about PCI 2.2 spec and 3.3V signaling
- From: Eric_Drozdov@alliedtelesyn.com (Eric Drozdov)
- Re: PCI Burst Length Limit
- From: "S.Murali Krishna" <sayam@virtualipgroup.com>
- Re: PCI Burst Length Limit
- From: "Sushil S.Kamerkar SO/C" <kamerkar@magnum.barc.ernet.in>
- RE: FFs for GNT and REQ
- From: "Kimmery, Clifford (FL51)" <clifford.kimmery@honeywell.com>
- Re: FFs for GNT and REQ
- From: "Weng Tianxiang" <wtx@umem.com>
- RE: FFs for GNT and REQ
- From: Richard Walter <rwalter@Brocade.COM>
- Re: FFs for GNT and REQ
- From: iachetta@us.ibm.com
- Re: FFs for GNT and REQ
- From: iachetta@us.ibm.com
- Re: Latency timer questions
- From: iachetta@us.ibm.com
- Re: FFs for GNT and REQ
- From: "Weng Tianxiang" <wtx@umem.com>
- RE: PCI configuration transaction
- From: Jeff Dahlin <JDahlin@appiangraphics.com>
- Re: FFs for GNT and REQ
- From: "Stefan Spaeth, tel. +49 711.821.43051, fax 45571" <S.Spaeth@alcatel.de>
- FFs for GNT and REQ
- From: Zipper Thomas <Thomas.Zipper@icn.siemens.de>
- Re: PCI Burst Length Limit (clarification)
- From: "Weng Tianxiang" <wtx@umem.com>
- PCI Burst Length Limit (clarification)
- From: olivier.stehlin@wifag.ch
- Re: Latency timer questions
- From: "Peter Marek" <peter.marek@marekmicro.de>
- PCI configuration transaction
- From: "Jim Chan" <tan264@hotmail.com>
- Latency timer questions
- From: Vijay Chougule <vchougule@yahoo.com>
- Re: PCI Burst Length Limit
- From: "Mikhail Matusov" <matusov@squarepeg.ca>
- RE: PCI Burst Length Limit
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Re: PCI Burst Length Limit
- From: Neal Palmer <neal@dinigroup.com>
- PCI Burst Length Limit
- From: olivier.stehlin@wifag.ch
- Re: Question about the initialization of configuration registers
- From: iachetta@us.ibm.com
- Re: Question about the initialization of configuration registers
- From: "Stefan Spaeth, tel. +49 711.821.43051, fax 45571" <S.Spaeth@alcatel.de>
Mail converted by MHonArc 2.5.2