Mail Index
[Prev Page][Next Page]
- RE: Is there a host bridge retry counter in the chipset and what is the count limit ?
- From: "Olaf Birkeland" <Olaf_Birkeland@hotmail.com>
- Question about the initialization of configuration registers
- From: "ÀÌõ¼ö" <LECOS@orgio.net>
- RE: Multiple Memory Windows for RISC Host Bridges
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Is there a host bridge retry counter in the chipset and what is the count limit ?
- From: William Wu <wwu@sebringnetworks.com>
- Search for generic PCI Master/Slave VHDL/Verilog Model
- From: "John D. Cappello" <jcappello@optimal-design.com>
- Re: Latest PCI Specifications and Documentations
- From: Daniel Weaver <dan.weaver@znyx.com>
- Re: Where to buy PCI-PCI bridge add-in cards? <PCI Bridge Evaluation and Test Boards>
- From: "Cary Snyder" <cdsnyder@earthlink.net>
- pci-x chip survey
- From: "Cary Snyder" <cdsnyder@earthlink.net>
- PCB Routing Guideline for PCI
- From: Conor Foley <Conor.Foley@tellabs.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- RE: Where to buy PCI-PCI bridge add-in cards?
- From: "Olaf Birkeland" <Olaf_Birkeland@hotmail.com>
- Where to buy PCI-PCI bridge add-in cards?
- From: Al Chou <AChou@SysLabs.com>
- Data Parity Error Recovery
- From: "Madhura Bokil" <madhura@controlnet.co.in>
- PCI SM Bus ECR
- From: "Reen Presnell" <rpresnell@vtm-inc.com>
- Can anyone spare 31 AMCC 5920's?
- From: Mike Dini <mdini@dinigroup.com>
- Multiple Memory Windows for RISC Host Bridges
- From: Paresh Patel <paresh@slscorp.com>
- Re: pci-x query
- From: Lloyd Bircher <nicad2@yahoo.com>
- Re: pci-x query
- From: "Amit Shah" <Amit@dcmtech.com>
- Re: pci-x query
- From: iachetta@us.ibm.com
- pci-x query
- From: "Madhura Bokil" <madhura@controlnet.co.in>
- RE: Is it a PCI specs violation that ...
- From: Richard Walter <rwalter@Brocade.COM>
- Is it a PCI specs violation that ...
- From: "Weng Tianxiang" <wtx@umem.com>
- RE: 5V vs. 3.3V signaling
- From: "John Bloomfield" <john@datacube.com>
- Re: 5V vs. 3.3V signaling
- From: Neal Palmer <neal@dinigroup.com>
- Re: 5V vs. 3.3V signaling
- From: Ivor Bowden <ivor@peritek.com>
- 5V vs. 3.3V signaling
- From: Alex Horvath <ahorvath@cisco.com>
- RE: Wanted to Buy|Lease: HP E2928A
- From: Austin Franklin <austin@darkroom.com>
- Re: Questions about PCI
- From: Ivor Bowden <ivor@peritek.com>
- RE: Wanted to Buy|Lease: HP E2928A
- From: Tom Jones <tjones@sebringnetworks.com>
- RE: Questions about PCI
- From: Richard Walter <rwalter@Brocade.COM>
- Pointers to cPCI: Enet-Switch/NEBS compliant power supplys
- From: Peleska Pavel <Pavel.Peleska@icn.siemens.de>
- Questions about PCI
- From: "Jim Chan" <tan264@hotmail.com>
- Interfacing PCI devices to AGP bus
- From: "Kline, Mark" <MKline@crossbeamsys.com>
- Re: Intel chipsets and prefetch during PCI target read
- From: Carter Buck <CBuck@PLXTech.com>
- Wanted to Buy|Lease: HP E2928A
- From: Tom Jones <tjones@sebringnetworks.com>
- Data Parity Error Recovery
- From: "Madhura Bokil" <madhura@controlnet.co.in>
- RE: Intel chipsets and prefetch during PCI target read
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Apologies -- Some network downtime
- From: Alan Deikman <Alan.Deikman@znyx.com>
- Intel chipsets and prefetch during PCI target read
- From: "William F Hong" <wfhong@west.raytheon.com>
- Re: looking for Parity signal status
- From: Kevin Normoyle <Kevin.Normoyle@Eng.Sun.COM>
- RE: looking for Parity signal status
- From: Richard Walter <rwalter@Brocade.COM>
- Re: looking for Parity signal status
- From: "Peter Marek" <peter.marek@marekmicro.de>
- looking for Parity signal status
- From: nimit.endlay@st.com
- RE: Address Stepping
- From: Tony Clark <Tony.Clark@mn.efi.com>
- Address Stepping
- From: Gene Morgan <morgan@equator.com>
- Help on PCI versions
- From: ROBBO <robbo@dfi.com.tw>
- MIN_GNT, MAX_LAT and class code effect on PCI master performance
- From: Graeme Gill <graeme@colorbus.com.au>
- RE: PCI Clock drivers
- From: "Peter Marek" <peter.marek@marekmicro.de>
- Re: looking for PCI clock driver
- From: "Richard Cotton" <rcotton@globalnet.co.uk>
- Re: looking for PCI clock driver
- From: Jose Franciso Toledo Alarcon <Jose.Toledo@cern.ch>
- looking for PCI clock driver
- From: Stuart Adams <sja@brightstareng.com>
- remove
- From: ljf <ljfww@cs.hn.cn>
- Re: Memory Configuration Space
- From: Jens Richter <richter@nentec.de>
- Re: Memory Configuration Space
- From: "Peter Marek" <peter.marek@marekmicro.de>
- Re: Offtopic - Interviews and non-disclosure agreements
- From: Steven Larky <spl@cypress.com>
- Re: Memory Configuration Space
- From: Gene Morgan <morgan@equator.com>
- RE: Offtopic - Interviews and non-disclosure agreements
- From: "Jim Boemler" <boemler@vnet.ibm.com>
- Fw: target burst accesses - resending
- From: "Weng Tianxiang" <wtx@umem.com>
- Fwd: Offtopic - Interviews and non-disclosure agreements
- From: Alan Deikman <Alan.Deikman@znyx.com>
- Memory Configuration Space
- From: Jens Richter <richter@nentec.de>
- Re: target burst accesses - resending
- From: Frank Story <frank.story@acoustictech.com>
- RE: Offtopic - Interviews and non-disclosure agreements
- From: Dave New <NewD@esi.com>
- Re: target burst accesses - resending
- From: "Monish Shah" <monishs_in@yahoo.com>
- Offtopic - Interviews and non-disclosure agreements
- From: Rick Collins - Arius <PCImail@arius.com>
- Re: target burst accesses - resending
- From: Duane Clark <dclark@akamail.com>
- target burst accesses - resending
- From: Vijay Chougule <vchougule@altavista.com>
- 64 bit PCI video cards?
- From: Austin Franklin <austin@darkroom.com>
- RE: Write Combining difference between 98 and NT
- From: Dave New <NewD@esi.com>
- RE: Memory Write and Invalidate
- From: "Tisani, Mohamad" <MTisani@pericom.com>
- Re: Write Combining difference between 98 and NT
- From: "Paul Slade" <Paul@pmis.freeserve.co.uk>
- Re: Memory Write and Invalidate
- From: Neal Palmer <neal@dinigroup.com>
- Re: PCI core logic for Target needed.
- From: "Weng Tianxiang" <wtx@umem.com>
- Re: Write Combining difference between 98 and NT
- From: "Paul Slade" <Paul@pmis.freeserve.co.uk>
- RE: PCI core logic for Target needed.
- From: austin@darkroom.com
- PCI Bracket Dimensions
- From: Al Keyworth <Al.Keyworth@computerboards.com>
- RE: Write Combining difference between 98 and NT
- From: Dave New <NewD@esi.com>
- PCI core logic for Target needed.
- From: Uwe Kirst <kirst@dvs.de>
- remove me from list
- From: "Sabareeshwaran" <sabree@controlnet.co.in>
- Write Combining difference between 98 and NT
- From: "Paul Slade" <Paul@pmis.freeserve.co.uk>
- Memory Write and Invalidate
- From: Duane Clark <dclark@akamail.com>
- Re: PCI core logic for Target needed.
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Fw: PCI-PCI bridge hot swap
- From: "Mark Santoro" <santoro@mindspring.com>
- PCI core logic for Target needed.
- From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
- PCI-PCI bridge hot swap
- From: Jim Stevens <jim.stevens@computerboards.com>
- Any operating systems support VPD yet?
- From: Neal Palmer <neal@dinigroup.com>
- PCI compliance for tristate output buffers
- From: masahiko_fukao@notes.takaoka.co.jp
- PCI compliance for tristate output buffers
- From: masahiko_fukao@notes.takaoka.co.jp
- PCI compliance for tristate output buffers
- From: Albert.Lo@flextronicssemi.com
- Re: Parity - impications of not implementing this
- From: Daniel Weaver <dan.weaver@znyx.com>
- Re: C/BE[3:0] - PCI traget implementation
- From: "Peter Marek" <peter.marek@marekmicro.de>
- Re: C/BE[3:0] - PCI traget implementation
- From: Marco Brambilla <marco-tpa.brambilla@st.com>
- Re: Parity - impications of not implementing this
- From: "Monish Shah" <monishs_in@yahoo.com>
- Re: PCI-to-PCI bridge
- From: "J. J. Farrell" <jjf@hal.com>
- C/BE[3:0] - PCI traget implementation
- From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
- Parity - impications of not implementing this
- From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
- Re: Message Signaled Interrupts
- From: Michael Richardson <mcr@sandelman.ottawa.on.ca>
- PCI-to-PCI bridge
- From: C V Sesha Sai Kumar <cvseshu@synopsys.com>
- PCI Card "HALT" Testing
- From: Daniel Weaver <dan.weaver@znyx.com>
- Re: <= 8 byte operations, with 64-bit PCI master
- From: "Monish Shah" <monishs_in@yahoo.com>
- <= 8 byte operations, with 64-bit PCI master
- From: Kevin Normoyle <Kevin.Normoyle@Eng.Sun.COM>
- PCI-X bus loading
- Re: Get PCI routing information.
- From: Lloyd Bircher <nicad2@yahoo.com>
- Re: Get PCI routing information.
- From: Ivor Bowden <ivor@peritek.com>
- Get PCI routing information.
- From: "Andy Vercauteren" <Andy.Vercauteren@egemin.be>
- Message Signaled Interrupts
- From: "J. J. Farrell" <jjf@hal.com>
- RE: Drivers PCI for CPV3060 & CPV5350
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Drivers PCI for CPV3060 & CPV5350
- From: Christophe.LINDHEIMER@tcc.thomson-csf.com
- clarification on DWORD
- From: Mario da Costa <mario@controlnet.co.in>
- RE: PCI PCB Specification
- From: Jim Sather <jsather@sbs.com>
- Re: PCI PCB Specification
- From: Mike Keenly <mkeenly@alteon.com>
- Re: PCI PCB Specification
- From: Richard Walter <rwalter@Brocade.COM>
- Re: PCI PCB Specification
- From: Neal Palmer <neal@dinigroup.com>
- Re: PCI PCB Specification
- From: Ivor Bowden <ivor@peritek.com>
- Re: Can a PCI Slave generate INTA# ?
- From: "Weng Tianxiang" <wtx@umem.com>
- RE: Can a PCI Slave generate INTA# ?
- From: "Holt, Patrick" <pholt@mc.com>
- Can a PCI Slave generate INTA# ?
- From: "Ram Y. Gopal" <ramgo@vEngines.com>
- PCI PCB Specification
- From: Mike Jones <Mike.Jones@renishaw.com>
- PCI PCB Specification
- From: Mike Jones <Mike.Jones@renishaw.com>
- PCI compliance for tristate output buffers
- From: masahiko_fukao@notes.takaoka.co.jp
- PCI compliance for tristate output buffers
- From: Albert.Lo@flextronicssemi.com
- Subtractive on DAC?
- From: Tom Jones <tjones@sebringnetworks.com>
- Generic PCI 64 or 66MHz interface chip availability?
- From: Austin Franklin <austin@darkroom.com>
- Re: pci9080 chip
- From: Stephan Gick <gck@iis.fhg.de>
- PAR64 location
- From: Ronnen Lovinger <ronnen@mellanox.co.il>
- RE: cPCI target
- From: Cadez Borut RDHW <b.cadez@iskratel.si>
- RE: pci9080 chip
- From: Gord Wait <Gord_Wait@spectrumsignal.com>
- RE: MLT value and PCI2PCI bridge
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- cPCI target
- From: Michael_Kharkover@amat.com
- MLT value and PCI2PCI bridge
- From: Peter.Heumann@Abg1.SIEMENS.DE
- Re: pci9080 chip
- From: "Masaru Naganuma" <naganuma@edec.co.jp>
- pci9080 chip
- From: "Harkema, G.A." <G.A.Harkema@tue.nl>
- Re: PCI device id and vendor id list
- From: "Thomas J. Merritt" <tjm@codegen.com>
- PCI device id and vendor id list
- From: "Shebayev, Eugene" <eshebaye@rbcds.com>
- RE: PCI-to-PCI Bridge
- From: "Tisani, Mohamad" <MTisani@pericom.com>
- MLT value and PCI2PCI bridge
- From: Peter.Heumann@Abg1.SIEMENS.DE
- RE: mini-pci to pci adapter
- From: Shuka Zernovizky <ShukaZ@m-sys.com>
- RE: PCI-to-PCI Bridge
- From: "W. J. Gomes III" <jgomes@integrated-dsp.com>
- RE: mini-pci to pci adapter
- From: "W. J. Gomes III" <jgomes@integrated-dsp.com>
- mini-pci to pci adapter
- From: "Peekay Chan" <peekay@synopsys.com>
- Join the No-Brainer Club today! $$$$$$
- From: 7WqQJrbU6@asahi-net.or.jp
- General purpose PCI 66/64 Bridge Chip
- From: Andrew <andrewstone@ozemail.com.au>
- RE: two loads on a single connector ?
- From: Jeff Dahlin <JDahlin@appiangraphics.com>
- Re: two loads on a single connector ?
- From: Neal Palmer <neal@dinigroup.com>
- two loads on a single connector ?
- From: fmnemeth@collins.rockwell.com
- RE: two loads on a single connector ?
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- No Subject
- From: dahlin@wa.freei.net
- two loads on a single connector ?
- From: "Muzaffer Kal" <muzaffer@kal.st> (by way of Daniel Weaver <danw@znyx.com>)
- RE: Clock design / spread spectrum question
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Intel 21152BA bridge (new stepping)
- From: Danny Pierini <danny.pierini@matrox.com>
- Clock design / spread spectrum question
- From: Klaus Bahner <kgb@tcelectronic.dk>
- PCI chip help.
- From: Viswanath K <Viswanath.Krishnamurthy@eng.sun.com>
- Re: Latency Timer Register Implementation
- From: Lloyd Bircher <nicad2@yahoo.com>
- PCI 2.2 compliant PADs
- From: Raan Kahn <raan@ngcable.com>
- Latency Timer Register Implementation
- From: RAVI CHANDRA ANANTHA <ravi_chandra25@usa.net>
- Connector for PCI
- From: Mahler Willi <Willi.Mahler@icn.siemens.de>
- Hot-swap and Reset Trhfa
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Re: PCI compatible microcontroller
- From: Klaus Bahner <kgb@tcelectronic.dk>
- Subsystem Vendor ID
- From: "Hayrettin B. Karayaka" <karayaka.1@osu.edu>
- Mini PCI Type III connector
- From: slava <slava@smlink.com>
- Re: Subsystem Vendor ID
- From: Rick Collins <arius@erols.com>
- Re: Subsystem Vendor ID
- From: "Mikhail Matusov" <matusov@squarepeg.ca>
- Re: Subsystem Vendor ID
- From: "Hayrettin B. Karayaka" <karayaka.1@osu.edu>
- mini-pci
- From: Greg Carraway <hrcinfo@yahoo.com>
- Re: Subsystem Vendor ID
- From: "Mikhail Matusov" <matusov@squarepeg.ca>
- RE: Subsystem Vendor ID
- From: "James Lam(SC)" <james.lam@o2micro.com>
- Fw: Subsystem Vendor ID
- From: "Weng" <wtx@umem.com>
- Re: Subsystem Vendor ID
- From: "Mikhail Matusov" <matusov@squarepeg.ca>
- Re: Subsystem Vendor ID
- From: "Weng" <wtx@umem.com>
- Re: Subsystem Vendor ID
- From: Lloyd Bircher <nicad2@yahoo.com>
- Subsystem Vendor ID
- From: "Hayrettin B. Karayaka" <karayaka.1@osu.edu>
- RE: Possible to limit size of DMA transfer?
- From: Moshe Gefen <Mosheg@m-sys.com>
- Email virus.
- From: dahlin@wa.freei.net
- Re: PCI Address Decode querry!!!
- From: "Weng" <wtx@umem.com>
- Re: Possible to limit size of DMA transfer?
- From: Lloyd Bircher <nicad2@yahoo.com>
- Re: Possible to limit size of DMA transfer?
- From: "Monish Shah" <monishs_in@yahoo.com>
- Possible to limit size of DMA transfer?
- From: Andy Davenport <ANDY@THUBAN.AC.HMC.EDU>
- Re: PCI Address Decode querry!!!
- From: "Monish Shah" <monishs_in@yahoo.com>
- PCI Address Decode querry!!!
- From: Narayan Kulshrestha <narayan@cmoschips.com>
- Re: PCI compatible microcontroller
- From: Farhad_Mafie@taec.toshiba.com
- Re: PCI compatible microcontroller
- From: "John L. Smith" <jsmith@visicom.com>
- Re: PCI compatible microcontroller
- From: "John L. Smith" <jsmith@visicom.com>
- Hot-plug/swap and Reset Trhff & Trhfa RE: How to guarantee Trhff for hot-swap
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- RE: PCI compatible microcontroller
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- PCI cards using 3.3v slots
- From: Olivier Cousin <OCousin@altera.com>
- PCI-Ethernetcard 3.3V
- From: "Gradl Hans (AT BE DI T15)" <Hans.1.Gradl@at.siemens.de>
- ISA to PCI Conversion
- From: VARGHESE PREMY <vpy@myw.ltindia.com>
- Re: Beginner questions about PCI.
- From: Bob Mathews <bobm@lsil.com>
- RE: PCI compatible microcontroller
- From: Arius - Rick Collins <rick.collins@arius.com>
- RE: PCI compatible microcontroller
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- RE: PCI POST card
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- PCI compatible microcontroller
- From: "Mukesh Kumar Mishra (96D07023)" <mkm@ee.iitb.ernet.in>
- Please filter Out of Office AutoReply
- From: "David Marcionek" <David_Marcionek@unicore.com>
- RE: Wanted : POST PCI card !
- From: Cabral Robert-G14714 <Robert_Cabral@mcg.mot.com>
- Re: PCI CLKS disabled relating to FPGA controllers ??
- From: tlyungha@collins.rockwell.com
- RE: Wanted : POST PCI card !
- From: Mike Wang <mike.wang@3WARE.com>
- How to guarantee Trhff for hot-swap
- From: Richard Walter <rwalter@Brocade.COM>
- Re: Wanted : POST PCI card !
- From: "David Marcionek" <David_Marcionek@unicore.com>
- Wanted : POST PCI card !
- From: Jean Petena <jean_petena@hp.com>
- Beginner questions about PCI.
- From: Christophe.LINDHEIMER@tcc.thomson-csf.com
- RE: PCI CLKS disabled relating to FPGA controllers ??
- From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
- PCI bridge performance
- From: "mano, oren" <mano_oren@emc.com>
Mail converted by MHonArc 2.5.2