Mail Index
[Prev Page][Next Page]
- PCI clock line length
- From: Pieter de Kock <Pieter.deKock@DataVoice.co.za>
- ISA Retainer
- From: Mahler Willi <Willi.Mahler@icn.siemens.de>
- Bus numbering
- From: Jeff Dahlin <JDahlin@appiangraphics.com>
- Pentium II and III characteristics
- From: "Leif E. Laerum" <llaerum@vmetro.com>
- Important PCI SIG reminders
- From: Richard Baek <rbaek@vtm-inc.com>
- FW: DON'T OPEN "CHECK THIS" EMAIL!!!!!!
- From: Keith Jasinski <jasinski@mortara.com>
- problem with PCI add-in cards with a PCI2PCI bridge on it
- From: "Lange, Michael" <lange@dvs.de>
- Check this
- From: Keith Jasinski <jasinski@mortara.com>
- PCI core design in FPGA
- From: Langus Matevz RDHW <langus@iskratel.si>
- Re: What is the good choice for a new Design ?
- From: "Monish Shah" <monish@poboxes.com>
- What is the good choice for a new Design ?
- From: francois.lepinette@sagem.com
- PCI Clock Driver
- From: Patrice Laroche <plaroche@cybectec.com>
- ACTEL pci core in a A54SX16P-PQ208
- From: Danny Pierini <Danny.Pierini@matrox.com>
- Retry counter
- From: Cadez Borut RDHW <b.cadez@iskratel.si>
- Re: PCI-X initialization requirements and FPGAs
- From: Arrigo Benedetti <arrigo@vision.caltech.edu>
- PCI-X initialization requirements and FPGAs
- From: Donald Connolly <Donald.Connolly@matrox.com>
- where can I find some examples for a PCI bus arbiter ?
- From: "Lange, Michael" <lange@dvs.de>
- REMINDER: PCI Compliance Workshop #21
- From: Richard Baek <rbaek@vtm-inc.com>
- Show me the $$$$$
- From: 52345104@compuserve.com
- Fire the Boss and break the Alarm Clock!
- From: success4you@hs.hsrds.dk
- Memory Read/Write with no byte enables
- From: "Witalka, Jerome J" <Jerome.Witalka@UNISYS.com>
- PCI/AGP bridge
- From: Danny Pierini <Danny.Pierini@matrox.com>
- Re: Subsystem Vendor ID
- From: "Bruce Young" <bayoung@frontiernet.net>
- configuration wr & SERR#
- From: "Man Tam" <mtam@mictron.com>
- PCI: Embarrassing newbie question...
- From: KEVIN_WIBLE@HP-Loveland-om2.om.hp.com
- RE: PCI-ISA bridges and ISAPNP
- From: "Andy Green" <andy.green@oxsemi.com>
- Subsystem Vendor ID
- From: "Theo Lindebaum" <t.lindebaum@wavecom.ch>
- PCI 64 bit/66MHz
- From: kevin.walsh@conexant.com
- RE: PCI-ISA bridges and ISAPNP
- From: Lame Brooks-G14738 <Brooks_Lame@mcg.mot.com>
- RE: PCI-ISA bridges and ISAPNP
- From: Dan Mick <Dan.Mick@West.Sun.COM>
- RE: PCI-ISA bridges and ISAPNP
- From: "Andy Green" <andy.green@oxsemi.com>
- PCI-ISA bridges and ISAPNP
- From: "Andy Green" <andy.green@oxsemi.com>
- RE: Why was this changed in 2.2? RE: What if BASE0 is not implemented ?
- From: "Brad Hosler" <brad@pc2.com>
- Re: Definition of Big Endianness of the PCI Bus
- From: wen-king@myri.com (Wen-King Su)
- Definition of Big Endianness of the PCI Bus
- From: Raghunath Tilak <Tilak@ambernetworks.com>
- RE: Expansion board decoupling specs
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- EXP8C49 REV 1.1, Expertcolor, with Cyrix 586 5x86 - 100GP chip
- From: "Ishwar S. Saxena" <iss@sympatico.ca>
- Re: Expansion board decoupling specs
- From: Dimiter Popoff <tgi@bulnet.bg>
- Re: Expansion board decoupling specs
- From: Richard Walter <rwalter@corp.auspex.com>
- Re: Expansion board decoupling specs
- From: "Monish Shah" <monish@poboxes.com>
- Re: Expansion board decoupling specs
- From: Dimiter Popoff <tgi@bulnet.bg>
- Re: Expansion board decoupling specs
- From: Dimiter Popoff <tgi@bulnet.bg>
- Re: Expansion board decoupling specs
- From: Ivor Bowden <ivor@peritek.com>
- Re: Expansion board decoupling specs
- From: Dimiter Popoff <tgi@bulnet.bg>
- Looking for 3.3V PCI cards, for compatibility tests.
- From: Ishay Shavit <Ishay.Shavit@nsc.com>
- Why was this changed in 2.2? RE: What if BASE0 is not implemented?
- From: Lame Brooks-G14738 <Brooks_Lame@mcg.mot.com>
- Expansion board decoupling specs
- From: Craig Rich <craig_rich@sundanceti.com>
- 5V->3.3V PCI converters
- From: "Mark K. Lee" <mlee@irus.rri.on.ca>
- Re: What if BASE0 is not implemented?
- From: Richard Walter <rwalter@corp.auspex.com>
- Re: What if BASE0 is not implemented?
- From: William Peet <peet@rtviz.com>
- RE: What if BASE0 is not implemented?
- From: Lame Brooks-G14738 <Brooks_Lame@mcg.mot.com>
- Who have "Plug and Play Option ROM Specification"?
- From: Xiaoming <dong@nss.dhs.org>
- What if BASE0 is not implemented?
- From: William Peet <peet@rtviz.com>
- Unidentified subject!
- From: Xiaoming <dong@nss.dhs.org>
- RE: differences PCI2.0 - PCI2.1
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- differences PCI2.0 - PCI2.1
- From: Olaf Reichenbaecher <Olaf.Reichenbaecher@sican.de>
- subcribe
- From: Hudiono@cmdexsvr.cmd.com
- PCI verse CardBus clock & reset timings
- Expansion card query.
- From: "Peter George" <petergeorge@lineone.net>
- PLease include me
- From: Ram Rangarajan <rrangarajan@advansys.com>
- RE: Configuration of memory/IO space
- From: Lame Brooks-G14738 <Brooks_Lame@mcg.mot.com>
- FW: failure notice
- From: Lame Brooks-G14738 <Brooks_Lame@mcg.mot.com>
- Start address with PCI-X
- From: Ganesan Viswanathan <ganesanv@ami.com>
- FW: Configuration of memory/IO space
- From: Raan Kahn <raan@ngcable.com>
- 440BX motherboards & PCI streaming
- From: Bruno.Fierens@barco.com
- Re: aribiter: "broken" master
- From: Richard Walter <rwalter@corp.auspex.com>
- PCI-X spec clarification
- From: "Solomon, Gary" <gary.solomon@intel.com>
- aribiter: "broken" master
- From: Tom Jones <tjones@sebringring.com>
- Class question
- From: "Gregory L. Hering" <glhering@gradkell.com>
- Two Queries
- From: "Peter George" <petergeorge@lineone.net>
- [Fwd: Help-strange issue!]
- From: Vishal Sharma <svishal@cromp.ernet.in>
- Information request
- From: "George Kolesnitsky" <georgeko@cityline.ru>
- Re: Experience of using GT64120
- From: "Monish Shah" <monish@HierAssist.com>
- Re: Experience of using GT64120
- From: "Monish Shah" <monish@HierAssist.com>
- Experience of using GT64120
- From: Raghunath Tilak <Tilak@ambernetworks.com>
- PCI specification
- From: Del Campo <delcampo@camtech.net.au>
- PCI SIG activities reminder (Compliance Workshop and Tech Update seminars)
- From: Richard Baek <rbaek@vtm-inc.com>
- PCI multi-port serial adapter???
- From: Randy Dunlap <randy.dunlap@att.net>
- PLX PCI9054 on 5V bus
- From: Bryn Wolfe <b.wolfe@ieee.org>
- RE: FPGA's and PCI
- From: "Olsen, Kim" <KOlsen@acdnj.itt.com>
- To do: Re: FPGA's and PCI
- From: Michael_Reusch@fastmultimedia.de
- Re: FPGA's and PCI
- From: Neal Palmer <neal@dinigroup.com>
- FPGA's and PCI
- From: "Jeff Leine" <jeff.leine@lecroy.com>
- half height pci
- From: "Jeff Leine" <jeff.leine@lecroy.com>
- Re: Need a 64 Bit PCI bus PC - 2nd try
- From: "John Birkner" <birkner@quicklogic.com>
- Re: Need a 64 Bit PCI bus PC - 2nd try
- From: "John Birkner" <birkner@quicklogic.com> (by way of Daniel Weaver <danw@znyx.com>)
- Intel 21154 bridge
- From: Potenzone Vince <Vince.Potenzone@nmg.sms.siemens.com>
- Fwd: Aribiter
- From: Tech Support <tech_support@eastronics.co.il>
- Re: PCI target use od DEVSEL#
- From: ervhom@erv.ericsson.se (Magnus Homann)
- PCI target use od DEVSEL#
- From: Kaustabh Duorah <duorah@txc.com>
- RE: PCI buffers and 5 volt tolerance
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- RE: 66 MHz Timing : Clock to Output Paramter
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- PCI Questions, Yet Again
- From: Raan Kahn <raan@ngcable.com>
- PCI chip samples
- From: "Khan Kibria" <kkibria@iss-us.com>
- Alain BRAS RE: Questions on compact PCI
- From: Lame Brooks-G14738 <Brooks_Lame@mcg.mot.com>
- Questions on compact PCI
- From: "ISIS-MPP" <isis_th@calva.net>
- RE: Transaction ordering
- From: ervhom@erv.ericsson.se (Magnus Homann)
- PCI Questions
- From: Raan Kahn <raan@ngcable.com>
- Transaction ordering
- From: ervhom@erv.ericsson.se (Magnus Homann)
- PCI buffers and 5 volt tolerance
- From: tchoug <tchoug@micron.com>
- 64-bit extenders for PCI
- From: Mike Dini <mdini@dinigroup.com>
- PAR64
- From: "Kjell A. Andersen" <kjell@vmetro.no>
- 66 MHz Timing : Clock to Output Paramter
- From: Raghunath Tilak <Tilak@ambernetworks.com>
- Re: "slow" PCI mother board
- From: Mike Dini <mdini@dinigroup.com>
- PCI Central Ressource
- From: Patrice Laroche <plaroche@cybectec.com>
- web-archives!
- From: "chefren" <chefren@pi.net> (by way of Daniel Weaver <danw@znyx.com>)
- Compact-PCI Questions
- From: "Bielski, Scott (MED)" <Scott.Bielski@amermsx.med.ge.com>
- V2.2 Compliant Motherboards
- From: Tom Paul <TomP@pptvision.com>
- RE: 2 Qs
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- Used Bandwidth on a PCI Bus
- From: Raghunath Tilak <Tilak@ambernetworks.com>
- Re: 2 Qs
- From: Richard Walter <rwalter@corp.auspex.com>
- 2 Qs
- From: Raan Kahn <raan@ngcable.com>
- Dream Vacation Getaway!! Win Florida/Cruise Sweepstakes !!
- From: taejualo96@quintessenz.at (Resopiu)
- PCI output buffer spec deviation
- From: "Bob Silvern 000" <bsil000@optonline.net>
- RE: How to design an expansion card.
- From: Lame Brooks-G14738 <Brooks_Lame@mcg.mot.com>
- Re: How to design an expansion card.
- From: "John R Pierce" <pierce@hogranch.com>
- subsrcibe
- From: froethli@TechFak.Uni-Bielefeld.DE (Frank Roethling)
- How to design an expansion card.
- From: "Peter George" <petergeorge@lineone.net>
- Mini PCI Pinout
- From: "John Clayton" <jclayton@vox2.com>
- RE: Not enough address space
- From: "Brad Hosler" <brad@pc2.com>
- RE: RE: Not enough address space
- From: Lame Brooks-G14738 <Brooks_Lame@mcg.mot.com>
- RE: Not enough address space
- From: Richard Walter <rwalter@corp.auspex.com>
- (no subject)
- From: Siji M K <sijimk@atitech.com>
- RE: PCI vendor/device ID list?
- From: Dan Mick <Dan.Mick@West.Sun.COM>
- Unidentified subject!
- From: "Stephan Rosner" <srosner@rapunzel.amd.com>
- reject wrong PWR state req
- From: "Stephan Rosner" <srosner@rapunzel.amd.com>
- RE: Not enough address space
- From: Lame Brooks-G14738 <Brooks_Lame@mcg.mot.com>
- Re: Not enough address space
- From: Alan Deikman <Alan.Deikman@znyx.com>
- Re: Not enough address space
- From: "John R Pierce" <pierce@hogranch.com>
- Not enough address space
- From: Mark Yeager <yeager@rtviz.com>
- Unidentified subject!
- From: "Samir Trubljanin" <samir2ax@bih.net.ba>
- Unidentified subject!
- From: "Samir Trubljanin" <samir2ax@bih.net.ba>
- RE: PCI hot-plug
- From: Lame Brooks-G14738 <Brooks_Lame@mcg.mot.com>
- RE: PCI vendor/device ID list?
- From: Tony_OConnor@avid.com
- PCI Controller chip Announcement
- From: "K Kibria" <kkibria@iss-us.com>
- RE: PCI vendor/device ID list?
- From: "Dunlap, Randy" <randy.dunlap@intel.com>
- RE: PCI vendor/device ID list?
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- PCI vendor/device ID list?
- From: "Dunlap, Randy" <randy.dunlap@intel.com>
- PCI hot-plug
- From: Shuka Zernovizky <ShukaZ@m-sys.com>
- Mini PCI
- From: Shuka Zernovizky <ShukaZ@m-sys.com>
- pci
- From: Breck Ricketts <breck@sound.net>
- International
- Re: FIFO buffer size for PCI64/66
- From: "Uwe Huebner" <uh@msc-ge.com>
- Re: FIFO buffer size for PCI64/66
- From: Alan Deikman <Alan.Deikman@znyx.com>
- FIFO buffer size for PCI64/66
- From: Arrigo Benedetti <arrigo@vision.caltech.edu>
- PCI Hot-Plug platforms
- From: Shuka Zernovizky <ShukaZ@m-sys.com>
- Re: Interrupt Request (fwd)
- From: Bob Mathews <bobm@lsil.com>
- Small & Mini PCI mechanical issues
- From: Shuka Zernovizky <ShukaZ@m-sys.com>
- Re: Interrupt Request
- From: "Wyatt C. Francis" <wcf1@Ra.MsState.Edu>
- Re: Interrupt Request (fwd)
- From: "Wyatt C. Francis" <wcf1@Ra.MsState.Edu>
- AW: Non posting of IO writes
- From: Peter Marek <peter.marek@dn1.de>
- Re: Non posting of IO writes
- From: Jeff Kimmel <kimmel@netapp.com>
- Re: Non posting of IO writes
- From: Kevin Normoyle <Kevin.Normoyle@Eng.Sun.COM>
- Re: Interrupt Request
- From: "Wyatt C. Francis" <wcf1@Ra.MsState.Edu>
- Interrupt Request
- From: Daniele Pinto <daniele.pinto@tei.ericsson.se>
- Re: Non posting of IO writes
- From: "Monish Shah" <monish@poboxes.com>
- Non posting of IO writes
- From: Kevin Normoyle <Kevin.Normoyle@Eng.Sun.COM>
- Power-up delay on PCI card (3.3V)
- From: Hiroshi Kawashima <kei@arch.sony.co.jp>
- Some Question about Pci specification 2.1
- From: jianguo li <samsonli55@yahoo.com>
- RE: ISA retainer for full length PCI card - where can I get them?
- From: Jeff Dahlin <JDahlin@appiangraphics.com>
- DEVSEL assertion
- From: Botlaguduru srinivas <botlaguduru_s@hotmail.com>
- Summary: Looking for PCI 64 bit @ 66 MHz
- From: Arrigo Benedetti <arrigo@vision.caltech.edu>
- RE: Section 6.8
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- Section 6.8
- From: "Dremann, Jeffrey E" <Jeffrey.Dremann@unisys.com>
- Looking for PCI 64 bit @ 66 MHz
- From: Arrigo Benedetti <arrigo@vision.caltech.edu>
- PCI Arbitration
- From: "Bob Edge" <bobe@bemacdev.demon.co.uk>
- ISA retainer for full length PCI card - where can I get them?
- From: Tom Stamp <TomS@Optiscan.com.au>
- Galileo GT-64130
- From: "Terje Melsom, VMETRO" <terje@vmetro.no>
- RE: PCI 5V board
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- PCI 5V board
- From: Moshe Gefen <Mosheg@m-sys.com>
- Re: pci querry
- From: "Monish Shah" <monish@poboxes.com>
- Re: pci querry
- From: Richard Walter <rwalter@corp.auspex.com>
- pci querry
- From: Botlaguduru srinivas <botlaguduru_s@hotmail.com>
- PCI-X Addendum -- Membership review
- From: Richard Baek <rbaek@vtm-inc.com>
- Cirrus Logic GD5465 Unreliable Operation
- From: "Dremann, Jeffrey E" <Jeffrey.Dremann@unisys.com>
- Survey on transition to 3.3V PCI
- From: David Cline <DavidC@motioneng.com>
- Power Specs 1.1
- From: Marco Brambilla <marco-misarc.brambilla@st.com>
- Re: help on choosing master /slave
- From: Jasper balraj <jasper@wipinfo.soft.net>
- hi..thx for your mail...some more queries...please
- From: Jasper balraj <jasper@wipinfo.soft.net>
- help on choosing master /slave
- From: Jasper balraj <jasper@wipinfo.soft.net>
- Re: Low Profile PCI - ECN proposal
- From: Richard Baek <rbaek@vtm-inc.com>
- Siemens PEB20534-PCI HDLC controller
- From: Yariv Saleternik <YarivS@gilat.com>
- Low Profile PCI - ECN proposal
- From: Peter Heumann <peter.heumann@icp.siemens.com>
- PCI short card dimension
- From: Tai Phan <phan@iphase.com>
- PCI 2.1 vs 2.2
- From: "Botlaguduru srinivas" <botlaguduru_s@hotmail.com>
- PCI cards that implement Target Aborts..
- From: "Jabori, Monji" <Monji.Jabori@COMPAQ.com>
- material on PCI to PCI bridges
- From: Shuka Zernovizky <ShukaZ@m-sys.com>
- Re: Compact PCI Signals
- From: CJ Clark <cjclark@INTELLITECH.COM>
- diff. between PCI and CompactPCI
- From: "Botlaguduru srinivas" <botlaguduru_s@hotmail.com>
- Upcoming PCI SIG Events
- From: Richard Baek <rbaek@vtm-inc.com>
- for post to pci-sig reflector
- From: rkcoleman1@mail.hac.com
- Re: Compact PCI Signals
- From: Richard Walter <rwalter@corp.auspex.com>
- re: Compact PCI Signals
- From: Alan Deikman <Alan.Deikman@znyx.com>
- Compact PCI Signals
- From: "Bielski, Scott (MED)" <Scott.Bielski@amermsx.med.ge.com>
- Traget ASICS
- From: "Graham B HENDERSON" <barryh@psb.gov.sg>
- PCI motherboard - Layout considerations
- From: Yariv Saleternik <YarivS@gilat.com>
- RE: Prefetched Data Discard Rules, ALi M1531B
- From: David See <davids@research.canon.com.au>
- Re: Side effects of writing 0xffffffff to base registers?
- From: Steven Larky <larky@anchorchips.com>
- RE: Side effects of writing 0xffffffff to base registers?
- From: Brooks Lame <Brooks_Lame@mcg.mot.com>
- Side effects of writing 0xffffffff to base registers?
- From: Drew Eckhardt <drew@Poohsticks.Org>
Mail converted by MHonArc 2.5.2