Mail Index

• Thread Index

• Re: FIFO sizes
  • From: Tom Verbeure <tom.verbeure@mie.alcatel.be>
• Re: FIFO sizes
  • From: Ravi Kaipa <Ravi.Kaipa@gsfc.nasa.gov>
• Re: FIFO sizes
  • From: Ken Crocker <kcrocker@kcconsulting.com>
• Re: PCI on AGP
  • From: "masao" <masao_y@yc4.so-net.ne.jp>
• Re: PCI on AGP
  • From: anthony@minster.cs.york.ac.uk
• Re: FIFO sizes
  • From: Rick Collins - Arius <PCImail@arius.com>
• RE: FIFO sizes
  • From: Tony Clark <Tony.Clark@mn.efi.com> (by way of Daniel Weaver <danw@znyx.com>)
• Re: pci compliant devices?
  • From: Stuart Adams <sja@brightstareng.com>
• RE: FIFO sizes
  • From: "Zinaty, Amir" <amir.zinaty@intel.com>
• Re: PCI on AGP
  • From: "masao" <masao_y@yc4.so-net.ne.jp>
• Re: PCI on AGP
  • From: "masao" <masao_y@yc4.so-net.ne.jp>
• Re: pci compliant devices?
  • From: "Jim McManus" <Jim.McManus@xilinx.com>
• look for a motherboard that has 3.3V PCI slots.
  • From: yang.can.mei@philips.com
• Re: PCI on AGP
  • From: Johannes Steigerwald <hannes.steigerwald@ops.de> (by way of Daniel Weaver <danw@znyx.com>)
• RE: PCI on AGP
  • From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
• RE: pci compliant devices?
  • From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
• RE: pci compliant devices?
  • From: Ivan-Pierre Batinic <ivan_batinic@3mts.com>
• Re: FIFO sizes
  • From: Tom Verbeure <tom.verbeure@mie.alcatel.be>
• RE: Unidentified subject!
  • From: Ivan-Pierre Batinic <ivan_batinic@3mts.com>
• Re: look for a motherboard that has 3.3V PCI slots.
  • From: "Jim McManus" <Jim.McManus@xilinx.com>
• Re: pci compliant devices?
  • From: "Peter Marek" <peter.marek@marekmicro.de>
• PCI card trace length (Was RE: pci compliant devices?)
  • From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
• Re: PCI card trace length - Possible new ECR?
  • From: "Jim McManus" <Jim.McManus@xilinx.com>
• Re: pci compliant devices?
  • From: "Jim McManus" <Jim.McManus@xilinx.com>
• ASIC Spins for 66MHz PCI
  • From: Mike Dini <mdini@dinigroup.com>
• RE: ASIC Spins for 66MHz PCI
  • From: Reza Vahedi <reza@cognex.com>
• RE: ASIC Spins for 66MHz PCI
  • From: austin@darkroom.com
• 133MHz PCI-X device loads
  • From: ramaprasad valluru <rvalluru@vooha.com>
• RE: ASIC Spins for 66MHz PCI
  • From: Dan Mick <Dan.Mick@West.Sun.COM>
• 5V supply in 3.3V systems
  • From: "Theo Lindebaum" <t.lindebaum@wavecom.ch>
• RE: 5V supply in 3.3V systems
  • From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
• RE: ASIC Spins for 66MHz PCI
  • From: Paul Taddonio <ptaddoni@nortelnetworks.COM>
• RE: ASIC Spins for 66MHz PCI
  • From: Ivan-Pierre Batinic <ivan_batinic@3mts.com>
• Yet another successor to PCI!
  • From: Alan Deikman <Alan.Deikman@znyx.com>
• CASH IN YOUR POCKET!!!!!!!!!!
  • From: unitedsuccess@RYGJ.hotmail.com
• RE: ASIC Spins for 66MHz PCI
  • From: Dimiter Popoff <tgi_earth@yahoo.com>
• RE: Yet another successor to PCI!
  • From: Patrick Holley <pholley@clok.creaf.com>
• Re: Yet another successor to PCI!
  • From: Udi Finkelstein <udif@bigfoot.com>
• Re: Yet another successor to PCI!
  • From: yang.can.mei@philips.com
• RE: Yet another successor to PCI!
  • From: Tony Clark <Tony.Clark@mn.efi.com>
• PCI Test Software
  • From: Lame Brooks-G14738 <brooks.lame@motorola.com>
• Re: PCI Test Software
  • From: Ivor Bowden <ivor@peritek.com>
• PCI card dimensions query
  • From: "francis olsen" <freddy8197@hotmail.com>
• Re: PCI SOFTWARE!
  • From: Martin Kutscher <martin@afimilk.co.il>
• Re: PCI Test Software
  • From: Uwe Kirst <kirst@dvs.de>
• Re: PCI Test Software
  • From: Tom Verbeure <tom.verbeure@mie.alcatel.be>
• RE: interruption sequence
  • From: Ivan-Pierre Batinic <ivan_batinic@3mts.com>
• mounting bracket retainer
  • From: anthony@minster.cs.york.ac.uk
• Re: mounting bracket retainer
  • From: Paul Walker <paul@4Links.co.uk>
• Graphics card schematics/design
  • From: "Peter Nayler" <nayler@pop.ses.curtin.edu.au>
• RE: Graphics card schematics/design
  • From: Lame Brooks-G14738 <brooks.lame@motorola.com>
• RE: interruption sequence
  • From: Richard Walter <rwalter@corp.auspex.com>
• LVDS Evaluation board
  • From: "Peter Marek" <peter.marek@marekmicro.de>
• 3.3 Volts and PMC Modules
  • From: Louis Przebienda <lprzebienda@acromag.com>
• RE: interruption sequence
  • From: Gérard Roudier <groudier@club-internet.fr>
• RE: 3.3 Volts and PMC Modules
  • From: Lame Brooks-G14738 <brooks.lame@motorola.com>
• RE: 3.3 Volts and PMC Modules
  • From: Ivor Bowden <ivor@peritek.com>
• RE: interruption sequence
  • From: SRD Ren Hantao <SVCRHT@sbell.com.cn>
• RE: RE: 3.3 Volts and PMC Modules
  • From: Lame Brooks-G14738 <brooks.lame@motorola.com>
• Re: PCI card dimensions query - Spec Questions?
  • From: "Cary Snyder" <cdsnyder@earthlink.net>
• RE: interruption sequence
  • From: Richard Walter <rwalter@corp.auspex.com>
• RE: RE: 3.3 Volts and PMC Modules
  • From: Ivor Bowden <ivor@peritek.com>
• Re: PCI card dimensions query - Spec Questions?
  • From: "francis olsen" <freddy8197@hotmail.com>
• Re: Message Signalled Interrupt Support
  • From: "Mohsin Rahmatullah" <mohsin@enabtech.com>
• RE: RE: 3.3 Volts and PMC Modules
  • From: Hugh Tarver <hwt@transtech-dsp.com>
• endians
  • From: Kaare Gärtner <kaare@spacetec.no>
• Spec wording RE: RE: 3.3 Volts and PMC Modules
  • From: Lame Brooks-G14738 <brooks.lame@motorola.com>
• RE: Message Signalled Interrupt Support
  • From: Lame Brooks-G14738 <brooks.lame@motorola.com>
• bandwidth concerns
  • From: Sarath Madakasira <smadakas@purros.poly.edu>
• RE: bandwidth concerns
  • From: chris.e.olson@lmco.com
• Q: How to power a PCI card from either 3.3V OR 5V..
  • From: Jesse Chamberlain <JChamberlain@mapletree.com>
• Re: bandwidth concerns
  • From: Alan Deikman <Alan.Deikman@znyx.com>
• Stock Alert, investors and stock holders, please read
  • From: 2ATdMq162@gygjhghj.com
• Nasty knock-on effect from incorrect BAR setting
  • From: Paul Walker <paul@4Links.co.uk>
• RE: How to power a PCI card from either 3.3V OR 5V..
  • From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
• VME sig??
  • From: "James E Kjendalen" <jekjen@ftw.rsc.raytheon.com>
• RE: How to power a PCI card from either 3.3V OR 5V..
  • From: Ivor Bowden <ivor@peritek.com>
• RE: How to power a PCI card from either 3.3V OR 5V..
  • From: jurry@csw.L-3com.com
• RE: How to power a PCI card from either 3.3V OR 5V..
  • From: Ivor Bowden <ivor@peritek.com>
• RE: How to power a PCI card from either 3.3V OR 5V..
  • From: Rick Collins - Arius <PCImail@arius.com>
• RE: How to power a PCI card from either 3.3V OR 5V..
  • From: Ivor Bowden <ivor@peritek.com>
• RE: How to power a PCI card from either 3.3V OR 5V..
  • From: Dimiter Popoff <tgi@bulnet.bg>
• RE: How to power a PCI card from either 3.3V OR 5V..
  • From: Dimiter Popoff <tgi_earth@yahoo.com>
• RE: interruption sequence
  • From: SRD Ren Hantao <SVCRHT@sbell.com.cn>
• Re: interruption sequence
  • From: "Thomas J. Merritt" <tjm@codegen.com>
• Odd behavior on GNT
  • From: Tony Clark <Tony.Clark@mn.efi.com>
• ISA retainer
  • From: kathy li <kathy.li@inet.com>
• pci expansion rom "hello world" program
  • From: Neal Palmer <neal@dinigroup.com>
• 66 MHz timing parameters
  • From: "Dror L." <drorl1@hotmail.com>
• Master enable Command bit
  • From: Hugh Tarver <hwt@transtech-dsp.com>
• Routing & Layout near PCI connector
  • From: "Dalanco Spry" <sales@dalanco.com>
• JTAG in expansion slots
  • From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
• Some basic queries
  • From: Prateek.Sharma@dcmds.co.in
• 840/820 chipset
  • From: dahlin@wa.freei.net
• RE: 840/820 chipset
  • From: Olivier Auberson <Olivier.Auberson@merging.com>
• RE: JTAG in expansion slots
  • From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
• RE: Some basic queries
  • From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
• MLT effect on Big transfer
  • From: kleiman@is.elta.co.il
• RE: Routing & Layout near PCI connector
  • From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
• Re: Some basic queries
  • From: "Swapnajit Mittra" <mittra@my-deja.com> (by way of Daniel Weaver <danw@znyx.com>)