Mail Index
[Prev Page][Next Page]
- Verilog models
- From: Chun Hung Lin <ChunHungLin@AIROHA.com.tw>
- RE: PC 104 plus signals
- From: Hartley Sweeten <hsweeten@mobl.com>
- PC 104 plus signals
- From: "Ola Wiberg" <ola_wiberg@viscount.com>
- Re: PCI PCB physical characteristics
- From: "Marco Serafini - QR s.r.l" <r&d@qrverona.it>
- Cache Support Pins
- From: Wayne Eckertson <WayneEckertson@VersaLogic.com>
- PCI air flow/thermal requirement
- From: Marisa Lin <mlin@redswitch.com>
- Re: PCI PCB physical characteristics
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- Re: Control line pull-ups on mixed 3v/5v system
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- RE: Control line pull-ups on mixed 3v/5v system
- From: "Joseph Brcich" <jbrcich@juniper.net>
- Control line pull-ups on mixed 3v/5v system
- From: Wayne Eckertson <WayneEckertson@VersaLogic.com>
- PCI PCB physical characteristics
- From: Iņigo Alvarez Ximenez de Embun <patxipatxi@jazzfree.com>
- Re: Prefetchable flag in BAR
- From: "Brian Breuer" <brian@videopropulsion.com>
- Re: Prefetchable flag in BAR
- From: Neal Palmer <neal@dinigroup.com>
- Prefetchable flag in BAR
- From: kseom@samsung.co.kr
- difference between Mini-PCI and compact PCI
- From: "Prasad Joshi" <prasadj@controlnet.co.in>
- RE: PCI-Express knowledge sharing
- From: "Nicholas Jones" <nickj@tality.com>
- Re: 64bit PCI card
- From: Neal Palmer <neal@dinigroup.com>
- Re:64bit PCI card
- From: nimit.endlay@st.com
- 64bit PCI card
- From: "Velayutham V" <velayuthamv@myw.ltindia.com>
- remove
- From: "Asato" <aac54490@pop17.odn.ne.jp>
- remove
- From: "Asato" <aac54490@pop17.odn.ne.jp>
- Configuring CardBus controllers behind secondary PCI bridges
- From: Eddie Lorenzo-Luaces <elorenzo-luaces@MeshNetworks.com>
- Re: detecting hot plugged PCI card on NT
- From: Roy Tannenbaum <roy@jungo.com>
- Re: detecting hot plugged PCI card on NT
- From: "Alexander Bezrukov" <alb_@pisem.net>
- detecting hot plugged PCI card on NT
- From: "dinesh" <dinesh@cosystems.com>
- PCI-Express knwoledge sharing
- From: "Yuval Avnon" <yuvala@galileo.co.il>
- Timing problem : setup not OK
- From: michael.pellegrino@modicon.com
- A problem in implementing pci9052(PLX)
- From: "Richard Fan" <fzy@robot.nankai.edu.cn>
- Re: Querry
- From: "Paul Miranda" <paul.miranda@amd.com>
- Re: Querry
- From: "Velayutham V" <velayuthamv@myw.ltindia.com>
- Querry
- From: "Nilesh\(einfochips\)" <nilesh@einfochips.com>
- RE: PCI On-card Trace Length
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- Re: pci vhdl code/ip core
- From: "Kevin Brace" <kevinbraceusenet@hotmail.com>
- Re: PCI 2.0/2.1 Compatibility Issue
- From: "Kevin Brace" <kevinbraceusenet@hotmail.com>
- PCI 2.0/2.1 Compatibility Issue
- From: Scott Davis <sdavis@Futurex.com>
- PCI On-card Trace Length
- From: "Charles Neumann" <c.neumann@aristoslogic.com>
- RE: PCI 2.3 and 5V signaling (was: PCI-X Compatibility)
- From: "Austin Franklin" <darkroom@ix.netcom.com>
- PCI 2.3 and 5V signaling (was: PCI-X Compatibility)
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- RE: RE: PCI-X Compatibility
- From: "Austin Franklin" <austin@darkroom.com>
- Fwd: RE: PCI-X Compatibility
- From: "Vashek Weis" <vashek@ast.co.il> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- RE: PCI-X Compatibility
- From: "Austin Franklin" <austin@darkroom.com>
- Fwd: PCI-X Compatibility
- From: "Vashek Weis" <vashek@ast.co.il> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- RE: PCI-X Compatibility
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- RE: PCI-X Compatibility
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- Re: word mismatch
- From: Matevz Langus <langus@iskratel.si>
- Re: word mismatch
- From: Mathieu Berland - 77160 <mathieu.berland@eads-telecom.com>
- PCI-X Compatibility
- From: "Markou, Pete" <Pete.Markou@GDC4S.Com>
- Re: word mismatch
- From: "Dan DeConinck" <daniel.deconinck@sympatico.ca>
- word mismatch
- From: Mathieu Berland - 77160 <mathieu.berland@eads-telecom.com>
- Re: Non registered outputs in PCIX Mode?
- From: Mario Michael da Costa <mario@controlnet.co.in>
- Non registered outputs in PCIX Mode?
- From: "Parag Birmiwal" <birmiwal@us.ibm.com>
- RE: Altera PCI MegaCore experiences
- From: "Mohammad Uddin" <uddin@okisemi.com>
- RE: pci vhdl code/ip core
- From: "Joseph Brcich" <jbrcich@juniper.net>
- RE: pci vhdl code/ip core
- From: "Charles Sweeney" <charles.sweeney@orangetreetech.com>
- pci vhdl code/ip core
- From: Abraham Thomas <abraham_ktm@yahoo.com>
- Re: Altera PCI MegaCore experiences
- From: "Kevin Brace" <kevinbraceusenet@hotmail.com>
- Re: Altera PCI MegaCore experiences
- From: "Velayutham V" <velayuthamv@myw.ltindia.com>
- Altera PCI MegaCore experiences
- From: "Reasoner, George E" <George.Reasoner@unisys.com>
- Compatibility of PCIX-Mode2 to Mode1
- From: Anil Kumar <akumar@nurlogic.com>
- voh/vol for PCIX Mode-2
- From: Anil Kumar <akumar@nurlogic.com>
- RE: Plagued by Pull-up Resistors
- From: Jim Wickenhiser <jim.wickenhiser@vicom.com>
- RE: Plagued by Pull-up Resistors
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- Re: Interrupt Disable / Status Bit: PCI 2.3
- From: "Ben Buchanan" <Benjamin.Buchanan@nsc.com>
- RE: Any Rules for Behavior of bus numbers changing?
- From: "Collins, Edward H" <edward.collins@unisys.com>
- Plagued by Pull-up Resistors
- From: Jim Wickenhiser <jim.wickenhiser@vicom.com>
- Re: PCI BIOS
- From: "Alexander Bezrukov" <alb_@pisem.net>
- Re: PCI BIOS
- From: Roy Tannenbaum <roy@jungo.com>
- Re: PCI BIOS
- From: "Velayutham V" <velayuthamv@myw.ltindia.com>
- PCI BIOS
- From: "Sreenath M.V." <sreenathmv@yahoo.com>
- PCI BIOS
- From: "Sreenath M.V." <sreenathmv@yahoo.com>
- Re: Any Rules for Behavior of bus numbers changing?
- From: "Alexander Bezrukov" <alb_@pisem.net>
- RE: Any Rules for Behavior of bus numbers changing?
- From: "SHEU,PHILIP (HP-Cupertino,ex3)" <psheu@hp.com>
- Any Rules for Behavior of bus numbers changing?
- From: "Collins, Edward H" <edward.collins@unisys.com>
- RE: LVTTL arbiter in PCI
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- LVTTL arbiter in PCI
- From: "Stefano Riccardi" <stefano.riccardi@diadix.it>
- When does Intel 860 chipset disconnect bursts to memory?
- From: "Marco Serafini - QR s.r.l" <r&d@qrverona.it>
- Com Port Muxed
- From: "Alokby, Ahmed" <ahmed.alokby@intel.com>
- RE: PLX 9080 in 3.3V signaling environment
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- RE: Voltages in PCI
- From: Ivor Bowden <ivor@peritek.com>
- RE: Voltages in PCI
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- Re: Voltages in PCI
- From: "Marco Serafini - QR s.r.l" <r&d@qrverona.it>
- Voltages in PCI
- From: "Joaquim Gomes" <ee97019@fe.up.pt>
- RE: Burned Connectors in PCs
- From: Jon Keeble <j.keeble@fairlightesp.com.au>
- Plastic extender tabs needed
- From: "Joe Underwood" <beekeepr@us.ibm.com>
- RE: DOS PCI and Interrupts
- From: Mike Berkowitz <mberkowitz@Futurex.com>
- Re: Burned Connectors in PCs -> Bypass
- From: scitel@t-online.de (Dr. Gerhart Hlawatsch)
- RE: Burned Connectors in PCs
- From: Jim Fisher <JFisher@icsmedical.com>
- Re: DOS PCI and Interrupts
- From: "Eric de Jong" <info@simultime.nl>
- RE: DOS PCI and Interrupts
- From: Mike Berkowitz <mberkowitz@Futurex.com>
- RE: Burned Connectors in PCs
- From: Rob Kellogg <RKellogg@netoctave.com>
- Burned Connectors in PCs
- From: "Pierre L. Deslauriers" <deslauriers@squarepeg.ca>
- RE: Conventional PCI mechanical specification
- From: Richard Walter <rwalter@brocade.com>
- RE: Conventional PCI mechanical specification
- From: Alex Huntley <Alex.Huntley@renishaw.com>
- Re: DOS PCI and Interrupts
- From: "Peter Marek" <peter.marek@marekmicro.de>
- Re: PCI Card causing PC to Hang
- From: Marco Brambilla <marco-tpa.brambilla@st.com>
- Conventional PCI mechanical specification
- From: "Bruce Newton" <bnewton@mecc.com.au>
- Re: PCI Card causing PC to Hang
- From: "Alexander Bezrukov" <alb_@pisem.net>
- Re: PCI Card causing PC to Hang
- From: "Kevin Brace" <kevinbraceusenet@hotmail.com>
- Re: PCI Card causing PC to Hang
- From: "Velayutham V" <velayuthamv@myw.ltindia.com>
- PCI Card causing PC to Hang
- From: Alex Huntley <Alex.Huntley@renishaw.com>
- Re: PCI to CompactPCI
- From: "Velayutham V" <velayuthamv@myw.ltindia.com>
- DOS PCI and Interrupts
- From: Mike Berkowitz <mberkowitz@Futurex.com>
- RE: PLX 9080 in 3.3V signaling environment
- From: Carter Buck <CBuck@PLXTech.com>
- RE: PLX 9080 in 3.3V signaling environment
- From: "Phipps, Michael" <michael.phipps@intel.com>
- RE: PLX 9080 in 3.3V signaling environment
- From: Iņigo Alvarez Ximenez de Embun <patxipatxi@jazzfree.com>
- PCI to CompactPCI
- From: "Dorothy Plawinski" <d.plawinski@acculogic.com>
- RE: PLX 9080 in 3.3V signaling environment
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- CompactPci Sepcifications
- From: "Dorothy Plawinski" <d.plawinski@acculogic.com>
- RE: PLX 9080 in 3.3V signaling environment
- From: Iņigo Alvarez Ximenez de Embun <patxipatxi@jazzfree.com>
- RE: PLX 9080 in 3.3V signaling environment
- From: "Phipps, Michael" <michael.phipps@intel.com>
- RE: PLX 9080 in 3.3V signaling environment
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- RE: PLX 9080 in 3.3V signaling environment
- From: "Phipps, Michael" <michael.phipps@intel.com>
- RE: PLX 9080 in 3.3V signaling environment
- From: Jim Stevens <Jim.Stevens@measurementcomputing.com>
- RE: PLX 9080 in 3.3V signaling environment
- From: "Phipps, Michael" <michael.phipps@intel.com>
- RE: PLX 9080 in 3.3V signaling environment
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- Re: problem with 21052-AB
- From: "Alexander Bezrukov" <alb_@pisem.net>
- Re: PLX 9080 in 3.3V signaling environment
- From: Carter Buck <CBuck@PLXTech.com>
- FW: PLX 9080 in 3.3V signaling environment
- From: Jim Stevens <Jim.Stevens@measurementcomputing.com>
- Re: PLX 9080 in 3.3V signaling environment
- From: "Vashek Weis" <vashek@ast.co.il> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- RE: Rules for setting/clearing Memory Access Enable bit of Command Register
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- PLX 9080 in 3.3V signaling environment
- From: Jim Stevens <Jim.Stevens@measurementcomputing.com>
- Re: ? PCI diagnosis software ( running under windows )
- From: "Velayutham V" <velayuthamv@myw.ltindia.com>
- Diagnosing tool kit
- From: "Lawrence Mburu" <lawrence_mburu@sil.org>
- problem with 21052-AB
- From: hennie.van.de.poel@philips.com
- Re: Rules for setting/clearing Memory Access Enable bit of Command Register
- From: "Alexander Bezrukov" <alb_@pisem.net>
- RE: Rules for setting/clearing Memory Access Enable bit of Command Register
- From: "Diamant, Nimrod" <nimrod.diamant@intel.com>
- Re: Rules for setting/clearing Memory Access Enable bit of Command Register
- From: "Alexander Bezrukov" <alb_@pisem.net>
- Rules for setting/clearing Memory Access Enable bit of Command Register
- From: "Support@PixelSmart.com" <support@pixelsmart.com>
- Re: PCI to PCI bridge
- From: "Peter Marek" <peter.marek@marekmicro.de>
- PCI to PCI bridge
- From: GAYATHRI PRABHU <gayathri@crlbel.ernet.in>
- PTMC carrier card
- From: "dinesh" <dinesh@cosystems.com>
- Re: ? PCI diagnosis software ( running under windows )
- From: "Peter Marek" <peter.marek@marekmicro.de>
- Re: ? PCI diagnosis software ( running under windows )
- From: scitel@t-online.de (Dr. Gerhart Hlawatsch)
- Looking for a Windows Utility
- From: "Lawrence Mburu" <lawrence_mburu@sil.org>
- Re: ? PCI diagnosis software ( running under windows )
- From: "Khan Kibria" <kkibria@iss-us.com>
- Re: use lock# to solve deadlock?
- From: "Alexander Bezrukov" <alb_@pisem.net>
- Re: ? PCI diagnosis software ( running under windows )
- From: "Velayutham V" <velayuthamv@myw.ltindia.com>
- Re: ? PCI diagnosis software ( running under windows )
- From: "Alexander Bezrukov" <alb_@pisem.net>
- ? PCI diagnosis software ( running under windows )
- From: "Support@PixelSmart.com" <support@pixelsmart.com>
- use lock# to solve deadlock?
- From: lyf <liuyunfei@routerd.com>
- PCI Express spec review
- From: Gord Caruk <Gord@ati.com>
- Re: Crossing the First 4 GB Address Boundary
- From: "Richard Iachetta" <iachetta@us.ibm.com>
- Crossing the First 4 GB Address Boundary
- From: Rob Kellogg <RKellogg@netoctave.com>
- RE: SERIRQ on PCI-connectror
- From: "Frank Story" <frank.story@acoustictech.com>
- Re: What is scatter/ gather. I am making a frame grabber with DMA .
- From: "Vashek Weis" <vashek@ast.co.il> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- Re: SERIRQ on PCI-connectror
- From: "Velayutham V" <velayuthamv@myw.ltindia.com>
- SERIRQ on PCI-connectror
- From: "Bichler, Alexander" <alb@msc-ge.com>
- Re: Multifunction Add-In Cards and PCI BIOS Enumeration
- From: "Peter Marek" <peter.marek@marekmicro.de>
- RE: What is scatter/ gather. I am making a frame grabber with DMA.
- From: Irv Negrin <Negrin@flarion.com>
- Cardbus interfaces
- From: Jon Keeble <j.keeble@fairlightesp.com.au>
- Cardbus specification
- From: "Sudeep Dennis" <sudeep.dennis@wipro.com>
- Re: Cardbus Power Management
- From: "Velayutham V" <velayuthamv@myw.ltindia.com>
- Cardbus Power Management
- From: "Sudeep Dennis" <sudeep.dennis@wipro.com>
- Re: What is scatter/ gather. I am making a frame grabber with DMA.
- From: Drew Eckhardt <drew@PoohSticks.ORG>
- Re: Multifunction Add-In Cards and PCI BIOS Enumeration
- From: "Alexander Bezrukov" <alb_@pisem.net>
- What is scatter/ gather. I am making a frame grabber with DMA.
- From: "Support@PixelSmart.com" <support@pixelsmart.com>
- Re: Multifunction Add-In Cards and PCI BIOS Enumeration
- From: "Paul Miranda" <paul.miranda@amd.com>
- RE: Multifunction Add-In Cards and PCI BIOS Enumeration
- From: "Sudeep Dennis" <sudeep.dennis@wipro.com>
- Re: Multifunction Add-In Cards and PCI BIOS Enumeration
- From: Steve Blightman <steve@alacritech.com>
- Multifunction Add-In Cards and PCI BIOS Enumeration
- From: Scott Davis <sdavis@Futurex.com>
- Expansion Card Physical Dimension & Tolerances
- From: "Velayutham V" <velayuthamv@myw.ltindia.com>
- RE: M66EN and PRSNT signals (re-send)
- From: "Ingraham, Andrew" <Andrew.Ingraham@hp.com>
- M66EN and PRSNT signals
- From: Anand.Kuriakose@smartm.com
- Re: PCI connection to PTMC on cPCI carrier
- From: Ivor Bowden <ivor@peritek.com>
- PCI bridge with local bus
- From: "dinesh" <dinesh@cosystems.com>
- PCI connection to PTMC on cPCI carrier
- From: "dinesh" <dinesh@cosystems.com>
- RE: Agilent E2928A PCI analyzer with serial port...
- From: "Austin Franklin" <austin@darkroom.com>
- Re: Agilent E2928A PCI analyzer with serial port...
- From: Vincent Cheng <vincent.cheng@tundra.com>
- RE: Card bus
- From: Chun Hung Lin <ChunHungLin@AIROHA.com.tw>
- Card bus
- From: "Lalith Kumar" <lalithkumart@myw.ltindia.com>
- Fast Devsel PCI to PCI Bridge
- From: "Charles Neumann" <c.neumann@aristoslogic.com>
- Interrupt Disable / Status Bit: PCI 2.3
- From: "Parag Birmiwal" <birmiwal@us.ibm.com>
- Primary Bus Number > Secondary Bus Number
- From: Lloyd Bircher <nicad2@yahoo.com>
- DMA Time Out
- From: "I. Servan Uzun" <isu@btae.mam.gov.tr>
- Re: New PCI card developing
- From: "Kevin Brace" <kevinbraceusenet@hotmail.com>
- Re: New PCI card developing
- From: "Kevin Brace" <kevinbraceusenet@hotmail.com>
- Re: New PCI card developing
- From: "Sergey Platovskikh" <sergey.platovskikh@vissim.no>
- Re: New PCI card developing
- From: Vashek Weis <plx-supp@ast.co.il> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- Re: New PCI card developing
- From: "Marco Serafini - QR s.r.l" <r&d@qrverona.it>
- Re: New PCI card developing
- From: "Venkateshwarlu V" <venkateshwarluv@myw.ltindia.com>
- RE: New PCI card developing
- From: "Kevin Brace" <kevinbraceusenet@hotmail.com>
- RE: New PCI card developing
- From: "Kevin Brace" <kevinbraceusenet@hotmail.com>
- RE: New PCI card developing
- From: "Austin Franklin" <darkroom@ix.netcom.com>
- RE: New PCI card developing
- From: "Kevin Brace" <kevinbraceusenet@hotmail.com>
- Re: New PCI card developing
- From: "Kevin Brace" <kevinbraceusenet@hotmail.com>
- Re: New PCI card developing
- From: "Kevin Brace" <kevinbraceusenet@hotmail.com>
- RE: New PCI card developing
- From: "Austin Franklin" <austin@darkroom.com>
- Re: What is memory allocation boundery in Dindows?
- From: "Monish Shah" <monish.shah@indranetworks.com>
- RE: What is memory allocation boundery in Dindows?
- From: "Peterson, George W" <george.w.peterson@intel.com>
- Re: ISA to PCI
- From: "Sergey Platovskikh" <sergey.platovskikh@vissim.no>
- Re: New PCI card developing
- From: kevin.sharpe@btinternet.com
- New PCI card developing
- From: "Sergey Platovskikh" <sergey.platovskikh@vissim.no>
- RE: What is memory allocation boundery in Dindows?
- From: "Weng Tianxiang" <WTX@umem.com>
- Re: What is memory allocation boundery in Dindows?
- From: "Paul Miranda" <paul.miranda@amd.com>
- Re: What is memory allocation boundery in Dindows?
- From: Daev Roehr <daevr@atc.creative.com>
- Re: What is memory allocation boundery in Dindows?
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: What is memory allocation boundery in Dindows?
- From: "Monish Shah" <monish.shah@indranetworks.com>
- Re: What is memory allocation boundery in Dindows?
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: What is memory allocation boundery in Dindows?
- From: "Peter Marek" <peter.marek@marekmicro.de>
- What is memory allocation boundery in Dindows?
- From: Henry Gong <hgong@cisco.com>
Mail converted by MHonArc 2.5.2