Mail Index
[Prev Page][Next Page]
- Re: CardBus to 66/64 extenders
- From: Michael Richardson <mcr@solidum.com>
- wait states
- From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
- Re: wait states
- From: Drew Eckhardt <drew@Poohsticks.ORG>
- PCI SIG Annual Meeting to elect Steering Committee Representatives
- From: "Jason Russell" <jrussell@vtm-inc.com> (by way of Daniel Weaver <danw@znyx.com>)
- PCI presentation
- From: Ilan Ossdon - Israel <ILANO@gilat.com>
- Can Low Profile PCI Cards be 64-bit?
- From: Richard Blackborow <richard@alacritech.com>
- Looking for 64 bits PCI Backplanes
- From: Shahar Eytan <shahar@mellanox.co.il>
- 3.3V power rail / M66EN
- From: Klaus Bahner <kgb@tcelectronic.dk>
- RE: 3.3V power rail / M66EN
- From: Austin Franklin <austin@darkroom.com>
- RE: 3.3V power rail / M66EN
- From: jurry@csw.L-3com.com
- RE: 3.3V power rail / M66EN
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- RE: 3.3V power rail / M66EN
- From: maarten.ghijsen@philips.com
- 3.3V power rail / M66EN
- From: jurry@csw.L-3com.com
- RE: Looking for 64 bits PCI Backplanes
- From: "WENDEL,TILMANN (A-Germany,ex1)" <tilmann_wendel@agilent.com>
- RE: 3.3V power rail / M66EN
- From: Austin Franklin <austin@darkroom.com>
- Power Sequencing and I/O Clamp
- From: dpannell@marvell.com
- RE: 3.3V power rail / M66EN
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- ISA-PCI Compatibility
- From: VARGHESE PREMY <vpy@myw.ltindia.com>
- max bus speed in PCI-X
- From: Prateek Sharma <Prateek.Sharma@dcmtech.co.in>
- Re: card vendors
- From: "Dharani Vilwanathan" <vdharani@dnrc.bell-labs.com>
- PCI IO Buffers
- From: Sean Ganjooi <sganjooi@xpeed.com>
- Re: card vendors
- From: "Scott C. Karlin" <scott@CS.Princeton.EDU>
- Information on PCI mapping
- From: "peter.ross" <peter.ross@imshq.ftech.co.uk>
- Re: PCI IO Buffers
- From: Ivor Bowden <ivor@peritek.com>
- Re: PCI IO Buffers
- From: Rick Collins - Arius <PCImail@arius.com>
- Calling all host bridge designers .....
- From: Alan Deikman <Alan.Deikman@znyx.com>
- "universal" PCI-to-PCI bridge?
- From: Shogren Michael-AMS130 <Michael_Shogren-AMS130@email.mot.com>
- 21154 bridge with 840 chipset
- From: Jim Sather <jsather@sbs.com>
- Re: Information on PCI mapping
- From: Sarath Madakasira <smadakas@purros.poly.edu>
- "Hang" on boot
- From: David N Hicks <dave@prescoinc.com>
- DMA modes
- From: "Jeff Leine" <jeff.leine@lecroy.com>
- Re: ASIC enquire
- From: David Cary <d.cary@ieee.org>
- RE: Calling all host bridge designers .....
- From: Ivan-Pierre Batinic <ivan_batinic@3mts.com>
- Re: "Hang" on boot
- From: "Peter Marek" <peter.marek@marekmicro.de>
- 8 slot PCI motherboard ????
- From: Steve Turner <steve.turner@motion-media.com>
- Re: DMA modes
- From: Ivor Bowden <ivor@peritek.com>
- 21154-AC and -BC
- From: Hironori Horinouchi <horinouchi@src-corp.co.jp>
- RE: 8 slot PCI motherboard ????
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Interrupt acknowledge Query
- From: Saravanan A <saran@cmoschips.com>
- Re: Interrupt acknowledge Query
- From: "Thomas J. Merritt" <tjm@codegen.com>
- Re: 8 slot PCI motherboard ????
- From: Geert Bellens <Geert.Bellens@esat.kuleuven.ac.be>
- A Million Dollars? 2 Ways To Get It...
- From: gJ7ZrS3qb@domail.do.net.tr
- Cheap motherboards that are PCI V2.2 compliant?
- From: Neil McGann <nm@techprt.co.uk>
- Re: Cheap motherboards that are PCI V2.2 compliant?
- From: Klaus Bahner <kgb@tcelectronic.dk>
- devices not seen, fpgas not getting the clock
- From: "Marco Brambilla (Wireline)" <marco-tpa.brambilla@st.com>
- +3.3V should be created on the PWB using a regulator
- From: Mike Dini <mdini@dinigroup.com>
- Re: Cheap motherboards that are PCI V2.2 compliant?
- From: Neil McGann <nm@techprt.co.uk>
- RE: devices not seen, fpgas not getting the clock
- From: Tony Clark <Tony.Clark@mn.efi.com>
- wintel
- From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
- Re: devices not seen, fpgas not getting the clock
- From: Stefan Spaeth <S.Spaeth@alcatel.de>
- Turning off empty slot clocks RE: devices not seen, fpgas not getting the clock
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Re: devices not seen, fpgas not getting the clock
- From: Olaf Birkeland <olaf@midten.fast.no>
- Re: +3.3V should be created on the PWB using a regulator
- From: Ivor Bowden <ivor@peritek.com>
- Re: +3.3V should be created on the PWB using a regulator
- From: Ivor Bowden <ivor@peritek.com>
- Backplane Termination
- From: "Scot Crowner" <scrowner@drti.com>
- RE: devices not seen, fpgas not getting the clock
- From: "Leif Erik Laerum" <llaerum@vmetro.com>
- Re: devices not seen, fpgas not getting the clock
- From: "Peter Marek" <peter.marek@marekmicro.de>
- Re: wintel
- From: "Marco Brambilla (Wireline)" <marco-tpa.brambilla@st.com>
- PCI CLKS disabled relating to FPGA controllers ??
- From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
- Re: PCI CLKS disabled relating to FPGA controllers ??
- From: Meindert Kuipers <meindertk@aexpo.com>
- Re: PCI CLKS disabled relating to FPGA controllers ??
- From: "Peter Marek" <peter.marek@marekmicro.de>
- PCI Chips
- From: Jim Dillon <jdx@cypress.com>
- Re: PCI CLKS disabled relating to FPGA controllers ??
- From: Emmanuel Lecomte <emmanuel.lecomte@mvd-fpga.com>
- Re:wintel
- From: "Weng" <wtx@umem.com>
- Re: PCI CLKS disabled relating to FPGA controllers ??
- From: "Marco Brambilla (Wireline)" <marco-tpa.brambilla@st.com>
- RE: PCI Chips
- From: "Reynoso, Aaron" <AReynoso@pericom.com>
- Re: ASIC enquire
- From: "Abhijit Athavale" <Abhijit.Athavale@xilinx.com>
- Question on PCI Chipsets
- From: egonzalezPC <egonzalez@hns.com>
- Can you send me the PCI local bus specification revision2.1?
- From: "boye Jie" <by_jie@hotmail.com>
- PCI bridge performance
- From: "mano, oren" <mano_oren@emc.com>
- RE: PCI CLKS disabled relating to FPGA controllers ??
- From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
- Beginner questions about PCI.
- From: Christophe.LINDHEIMER@tcc.thomson-csf.com
- Wanted : POST PCI card !
- From: Jean Petena <jean_petena@hp.com>
- Re: Wanted : POST PCI card !
- From: "David Marcionek" <David_Marcionek@unicore.com>
- How to guarantee Trhff for hot-swap
- From: Richard Walter <rwalter@Brocade.COM>
- RE: Wanted : POST PCI card !
- From: Mike Wang <mike.wang@3WARE.com>
- Re: PCI CLKS disabled relating to FPGA controllers ??
- From: tlyungha@collins.rockwell.com
- RE: Wanted : POST PCI card !
- From: Cabral Robert-G14714 <Robert_Cabral@mcg.mot.com>
- Please filter Out of Office AutoReply
- From: "David Marcionek" <David_Marcionek@unicore.com>
- PCI compatible microcontroller
- From: "Mukesh Kumar Mishra (96D07023)" <mkm@ee.iitb.ernet.in>
- RE: PCI POST card
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- RE: PCI compatible microcontroller
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- RE: PCI compatible microcontroller
- From: Arius - Rick Collins <rick.collins@arius.com>
- Re: Beginner questions about PCI.
- From: Bob Mathews <bobm@lsil.com>
- ISA to PCI Conversion
- From: VARGHESE PREMY <vpy@myw.ltindia.com>
- PCI-Ethernetcard 3.3V
- From: "Gradl Hans (AT BE DI T15)" <Hans.1.Gradl@at.siemens.de>
- PCI cards using 3.3v slots
- From: Olivier Cousin <OCousin@altera.com>
- RE: PCI compatible microcontroller
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Hot-plug/swap and Reset Trhff & Trhfa RE: How to guarantee Trhff for hot-swap
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Re: PCI compatible microcontroller
- From: "John L. Smith" <jsmith@visicom.com>
- Re: PCI compatible microcontroller
- From: "John L. Smith" <jsmith@visicom.com>
- Re: PCI compatible microcontroller
- From: Farhad_Mafie@taec.toshiba.com
- PCI Address Decode querry!!!
- From: Narayan Kulshrestha <narayan@cmoschips.com>
- Re: PCI Address Decode querry!!!
- From: "Monish Shah" <monishs_in@yahoo.com>
- Possible to limit size of DMA transfer?
- From: Andy Davenport <ANDY@THUBAN.AC.HMC.EDU>
- Re: Possible to limit size of DMA transfer?
- From: "Monish Shah" <monishs_in@yahoo.com>
- Re: Possible to limit size of DMA transfer?
- From: Lloyd Bircher <nicad2@yahoo.com>
- Re: PCI Address Decode querry!!!
- From: "Weng" <wtx@umem.com>
- Email virus.
- From: dahlin@wa.freei.net
- RE: Possible to limit size of DMA transfer?
- From: Moshe Gefen <Mosheg@m-sys.com>
Mail converted by MHonArc 2.4.4