Mail Index
[Prev Page][Next Page]
- RE: How to achieve a long burst?
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Re: How to achieve a long burst?
- From: "Peter Marek" <peter.marek@marekmicro.de>
- Re: How to achieve a long burst?
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- Re: How to achieve a long burst <OFFTOPIC>?
- From: "Schaefer, Peter" <Peter.Schaefer.tiscon_ag@vs.dasa.de>
- Re: How to achieve a long burst <OFFTOPIC>?
- From: "Scott C. Karlin" <scott@CS.Princeton.EDU>
- Re: How to achieve a long burst?
- From: Klaus Bahner <kgb@tcelectronic.dk>
- Re: How to achieve a long burst?
- From: "Scott C. Karlin" <scott@CS.Princeton.EDU>
- Re: How to achieve a long burst?
- From: Neal Palmer <neal@dinigroup.com>
- DMA across PCI
- From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
- RE: <OFFTOPIC>? How to achieve a long burst
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Legacy Terminology RE: DMA across PCI
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Re: DMA across PCI
- From: "Weng Tianxiang" <wtx@umem.com>
- Re: Legacy Terminology RE: DMA across PCI
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- Re: DMA across PCI
- From: Neal Palmer <neal@dinigroup.com>
- RE: Legacy Terminology RE: DMA across PCI
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- RE: DMA across PCI
- From: Austin Franklin <austin@darkroom.com>
- RE: Legacy Terminology RE: DMA across PCI
- From: "John Cappello" <jdc_odi@hotmail.com>
- RE: Legacy Terminology RE: DMA across PCI
- From: Gord Wait <Gord_Wait@spectrumsignal.com>
- Show me the document RE: Legacy Terminology RE: DMA across PCI
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Re: Show me the document RE: Legacy Terminology RE: DMA across PCI
- From: "J. J. Farrell" <jjf@bcs.org.uk>
- Re: How to achieve a long burst?
- From: "Peter Marek" <peter.marek@marekmicro.de>
- RE: Show me the document RE: Legacy Terminology RE: DMA across PCI
- From: Austin Franklin <austin@darkroom.com>
- Re: How to achieve a long burst?
- From: "Scott C. Karlin" <scott@CS.Princeton.EDU>
- Re: How to achieve a long burst?
- From: "Peter Marek" <peter.marek@marekmicro.de>
- RE: How to achieve a long burst?
- From: "Clark, Raymond J (WBST)" <Raymond.Clark@usa.xerox.com>
- Re: How to achieve a long burst?
- From: "Weng Tianxiang" <wtx@umem.com>
- Footnote RE: Legacy Terminology RE: DMA across PCI
- From: "Schneider, Dave" <Dave.Schneider@emulex.com>
- Updating data
- From: Digital Aryan <digitalaryan@yahoo.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- Re: Footnote RE: Legacy Terminology RE: DMA across PCI
- From: dpannell@marvell.com
- Re: Footnote RE: Legacy Terminology RE: DMA across PCI
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- TI PCI-2050
- From: "Scot Crowner" <scrowner@drti.com>
- Re: Footnote RE: Legacy Terminology RE: DMA across PCI
- From: Kevin Normoyle <Kevin.Normoyle@Eng.Sun.COM>
- IBM SAGE 1955
- From: Kevin Normoyle <Kevin.Normoyle@Eng.Sun.COM>
- Help on 21554
- From: Christophe.LINDHEIMER@tcc.thomson-csf.com
- Fwd: Help on 21554
- From: Alan Deikman <Alan.Deikman@znyx.com>
- RE: IBM SAGE 1955
- From: "Frazee, Walt" <Walt@VistaControls.com>
- RE: IBM SAGE 1955
- From: "Frazee, Walt" <Walt@VistaControls.com>
- RE: Help on 21554
- From: Christophe.LINDHEIMER@tcc.thomson-csf.com
- Maximum Power for add in card more than 25W
- From: brad yu <bradyu2001@yahoo.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- Re: Maximum Power for add in card more than 25W
- From: Klaus Bahner <kgb@tcelectronic.dk>
- RE: Maximum Power for add in card more than 25W
- From: Richard Walter <rwalter@Brocade.COM>
- Re: Maximum Power for add in card more than 25W
- From: Anthony Moulds <anthony@cs.york.ac.uk>
- FW: Maximum Power for add in card more than 25W
- From: Jim Sather <jsather@sbs.com>
- 66MHz PCI Board
- From: Amit Shah <amits@agere.com>
- RE: Maximum Power for add in card more than 25W
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Re: Maximum Power for add in card more than 25W
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- pci bandwidth calculations
- From: Tom Curran <tom_curran@memecdesign.com>
- Fwd: pci bandwidth calculations
- From: Alan Deikman <Alan.Deikman@znyx.com>
- 21154 Bridge SCLK Power-up Errata
- From: Mike Dini <mdini@dinigroup.com>
- RE: 21154 Bridge SCLK Power-up Errata
- From: Shepard Bob-G14751 <Bob.Shepard@motorola.com>
- RE: Help on 21554
- From: Shepard Bob-G14751 <Bob.Shepard@motorola.com>
- 1st Annual International Linux Plug Fest
- From: Melissa Almgren <melissa@linuxcare.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- very slow response of memory read with VIA KT133 chipset
- From: yang.can.mei@philips.com
- Re: very slow response of memory read with VIA KT133 chipset
- From: "Weng Tianxiang" <wtx@umem.com>
- Flash Card ? (not IDE drive emulator)
- From: Philip Decker <pdecker@wavewireless.com>
- Question about 3.3V Aux
- From: Eric_Drozdov@alliedtelesyn.com (Eric Drozdov)
- PCI Bus Performance
- From: "Don Wright" <dwright@seistl.com>
- Re: Question about 3.3V Aux
- From: Michael Richardson <mcr@research.solidum.com>
- RE: 21154 Bridge SCLK Power-up Errata
- From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
- PWB Stiffeners
- From: Mike Dini <mdini@dinigroup.com>
- vga on pci references?
- From: Tom Curran <tom_curran@memecdesign.com>
- Plugfest
- From: KC Chang <kc.chang@tundra.com>
- PCI 3.3V Supply Rail Tolerance
- From: Richard Blackborow <richard@alacritech.com>
- What is MicroPCI?
- From: Henry Gong <henry.gong@radiata.com>
- How to trade-off between a long timeout of TRDY response and system bandwidth holdingup time?
- From: yang.can.mei@philips.com
- FREE! REFER FREE VISA CARD, MAKE $10.00
- From: <success3004@hotmail.com>
- Embedded Ethernet controllers
- From: Eric_Drozdov@alliedtelesyn.com (Eric Drozdov)
- RE: Embedded Ethernet controllers
- From: "Wagnon, Greg" <greg.wagnon@intel.com>
- PC reset
- From: Goran Grbic <grbic@mosaid.com>
- PCI 3.3V Supply Rail Tolerance (resend)
- From: Richard Blackborow <richard@alacritech.com>
- RE: Embedded Ethernet controllers
- From: Arius - Rick Collins <rick.collins@arius.com>
- Re: Embedded Ethernet controllers
- From: Udi Finkelstein <udif@bigfoot.com>
- non-PCI Ethernet controller for Drozdov
- From: "Wagnon, Greg" <greg.wagnon@intel.com>
- RE: PCI 3.3V Supply Rail Tolerance (resend)
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Any PCI specs violation?
- From: "Weng Tianxiang" <wtx@umem.com>
- Calling the PCI BIOS under Windows NT 4.0 / Windows 2000
- From: maximino.castro@ni.com
- RE: Calling the PCI BIOS under Windows NT 4.0 / Windows 2000
- From: Keith Jasinski <jasinski@mortara.com>
- RE: Calling the PCI BIOS under Windows NT 4.0 / Windows 2000
- From: Dave New <NewD@esi.com>
- RE: Calling the PCI BIOS under Windows NT 4.0 / Windows 2000
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- PCI Bandwidth Usage
- From: "Don Wright" <dwright@seistl.com>
- Delayed Read Timeout
- From: duncan <duncan@mediaone.net>
- Re: Any PCI specs violation?
- From: Olaf Reichenbaecher <Olaf.Reichenbaecher@sci-worx.com>
- RE: Delayed Read Timeout
- From: Tony Clark <Tony.Clark@EFI.COM>
- RE: Calling the PCI BIOS under Windows NT 4.0 / Windows 2000
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- RE: Any PCI specs violation?
- From: "Francois Barlow" <fbarlow@matrox.com>
- 3.3V PCI
- From: Paul Capes <pcapes@ics-ltd.com>
- RE: 3.3V PCI
- From: KC Chang <kc.chang@tundra.com>
- RE: Delayed Read Timeout
- From: "James Lam(SC)" <james.lam@o2micro.com>
- Re: 3.3V PCI
- From: Richard Blackborow <richard@alacritech.com>
- RE: 3.3V PCI
- From: "Peterson, George W" <george.w.peterson@intel.com>
- RE: 3.3V PCI
- From: KC Chang <kc.chang@tundra.com>
- Re: 3.3V PCI
- From: Neal Palmer <neal@dinigroup.com>
- RE: 3.3V PCI
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- What is MicroPCI?
- From: Henry Gong <henry.gong@radiata.com>
- Re: 3.3V PCI
- From: Anthony Moulds <anthony@cs.york.ac.uk>
- Re: Any PCI specs violation? -- a prove on its vaiolation
- From: "Weng Tianxiang" <wtx@umem.com>
- Re: Problems with i21154 bridge
- From: Jose Franciso Toledo Alarcon <Jose.Toledo@cern.ch>
- PCI/FPDP
- From: "Olson, Chris E" <chris.e.olson@lmco.com>
- RE: Any PCI specs violation? -- a prove on its vaiolation
- From: "Francois Barlow" <fbarlow@matrox.com>
- Re: Problems with i21154 bridge
- From: Neal Palmer <neal@dinigroup.com>
Mail converted by MHonArc 2.4.4