Mail Index

• Thread Index

• formula for adjusting pci clock?
  • From: "Tom Curran" <tom_curran@memecdesign.com>
• JTAG pins
  • From: Ted Firlit <firlit@utmc.aeroflex.com>
• RE: formula for adjusting pci clock?
  • From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
• Re: pci retry
  • From: Sanjay Cartic <scartic@ixiacom.com>
• Technology 3GIO Bus
  • From: OSWALDO HIDALGO <OHIDALGO@unicon.com.pe>
• RE: JTAG pins
  • From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
• remove
  • From: "Janusz Kopczyk" <dsplab@wr.onet.pl>
• How ?
  • From: "Ingemi, John" <John.Ingemi@compuware.com>
• RE: JTAG pins
  • From: Lame Brooks-G14738 <Brooks_Lame-G14738@email.mot.com>
• RJ-45 jacks for PMC module ???
  • From: Stuart Adams <sja@brightstareng.com>
• Excess Retries to Bridge on Primary Side
  • From: Pawitter Pal Singh <Pawitter.bhatia@dcmtech.co.in>
• driver for 21554
  • From: richard.snijders@philips.com
• Re: JTAG pins
  • From: Ted Firlit <firlit@utmc.aeroflex.com>
• Question
  • From: "Kashif Ghafoor" <kashif.ghafoor@and-or.com>
• Burst Read in slave mode
  • From: michael.pellegrino@modicon.com
• RE: Burst Read in slave mode
  • From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
• Question
  • From: "Kashif Ghafoor" <kashif.ghafoor@and-or.com>
• Information Required
  • From: "Kashif Ghafoor" <kashif.ghafoor@and-or.com>
• Transaction Ordering
  • From: "Kashif Ghafoor" <kashif.ghafoor@and-or.com>
• C/C++ to VHDL-Compiler
  • From: tschmidt2@gmx.de
• RE: Burst Read in slave mode
  • From: Lame Brooks-G14738 <Brooks_Lame-G14738@email.mot.com>
• request for info on products that comply with low profile PCI card ECN (MD1 or MD2)
  • From: "SHEU,PHILIP (HP-Cupertino,ex3)" <psheu@hp.com>
• RE: Burst Read in slave mode
  • From: "Fockler, Joe" <jfockler@chipdata.com>
• Re: Burst Read in slave mode
  • From: "Randy.Dunlap" <rddunlap@osdlab.org>
• Re: C/C++ to VHDL-Compiler
  • From: wamnet <wamnet@gte.net>
• Multiple delayed transactions
  • From: "Kashif Ghafoor" <kasheeg@hotmail.com>
• Transactions Rules
  • From: "Kashif Ghafoor" <kasheeg@hotmail.com>
• Split Completions
  • From: "Srividya Viswanathan" <srividya.viswanathan@idt.com>
• Re: Split Completions
  • From: Amit Shah <ashah10@agere.com>
• 3GIO Interest
  • From: Alan.Deikman@znyx.com
• Some question about Delayed transaction
  • From: Yanzhe Liu <liu@gdatech.com>
• ASUS CUR-DLS 66MHz slot keying....did they screw it up?
  • From: "Austin Franklin" <darkroom@ix.netcom.com>
• RE: ASUS CUR-DLS 66MHz slot keying....did they screw it up?
  • From: "SHEU,PHILIP (HP-Cupertino,ex3)" <psheu@hp.com>
• RE: ASUS CUR-DLS 66MHz slot keying....did they screw it up?
  • From: "Austin Franklin" <austin@darkroom.com>
• RE: ASUS CUR-DLS 66MHz slot keying....did they screw it up?
  • From: "Austin Franklin" <austin@darkroom.com>
• Re: ASUS CUR-DLS 66MHz slot keying....did they screw it up?
  • From: "mehrdad moradkhani" <mehrdad_am@hotmail.com>
• Re: ASUS CUR-DLS 66MHz slot keying....did they screw it up?
  • From: "mehrdad moradkhani" <mehrdad_am@hotmail.com>
• RE: ASUS CUR-DLS 66MHz slot keying....did they screw it up?
  • From: "mehrdad moradkhani" <mehrdad_am@hotmail.com>
• PCI undershoot/overshoot.
  • From: Ramesh.Reddy@smartm.com
• RE: ASUS CUR-DLS 66MHz slot keying....did they screw it up?
  • From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
• PCI enumeration and multiple processors
  • From: fmnemeth@rockwellcollins.com
• Re: PCI enumeration and multiple processors
  • From: "Martijn Emons - Arcobel ASIC Design Centre B.V." <martijn.emons@arcobel.nl>
• Multiple processors and pci-transparancy
  • From: "Martijn Emons - Arcobel ASIC Design Centre B.V." <martijn.emons@arcobel.nl>
• PCI-SIG and "3GIO"
  • From: "Tipley, Roger" <Roger.Tipley@compaq.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
• From ASIS - : slot keying for 66MHz slots on CUR-DLS is wrong.
  • From: "Austin Franklin" <darkroom@ix.netcom.com>
• Sequence ID
  • From: "Kashif Ghafoor" <kasheeg@hotmail.com>
• Intel 850 Chipset
  • From: "Marco Serafini - QR s.r.l" <r&d@qrverona.it>
• RE: JTAG pins
  • From: Ted Firlit <firlit@utmc.aeroflex.com>
• To the folks looking for stradle - mount PCI conntectors...
  • From: Lame Brooks-G14738 <Brooks_Lame-G14738@email.mot.com>
• Re: To the folks looking for stradle - mount PCI conntectors...
  • From: "Dr. Gerhart Hlawatsch" <ghl@scitel.de>
• need help writing device driver for own made PCI card
  • From: JohanHZ@Sycron-IT.com
• Re: Fwd: need help writing device driver for own made PCI card
  • From: Roy Tannenbaum <roy@jungo.com>
• Compact PCI hotswap
  • From: Sivasubramanian Prasanna <prasanna_cit97@yahoo.com>
• 4k memory block size
  • From: Ben Yurick <byurick@keithley.com>
• RE: Compact PCI hotswap
  • From: Lame Brooks-G14738 <Brooks_Lame-G14738@email.mot.com>
• Re: 4k memory block size
  • From: "Peter Marek" <peter.marek@marekmicro.de>
• What is a PCI 'ping pong' cycle ?
  • From: Ramesh Sathianathan <ramesh@0-in.com>
• Problems in configuration
  • From: "VENKATESHWARLU V" <vv@myw.ltindia.com>
• Memory Allocation !!
  • From: Amit Shah <ashah10@agere.com>
• Re: Memory Allocation !!
  • From: André David <Andre.David@cern.ch>
• RE: Memory Allocation !!
  • From: Sanjay Cartic <scartic@ixiacom.com>
• RE: Memory Allocation !!
  • From: Sanjay Cartic <scartic@ixiacom.com>
• Re: Memory Allocation !!
  • From: "Peter Marek" <peter.marek@marekmicro.de>
• PCI with Bios in Embedded system
  • From: Tom Then <tthen@osi.varianinc.com>
• RE: PCI with Bios in Embedded system
  • From: Lame Brooks-G14738 <Brooks_Lame-G14738@email.mot.com>
• PCIX Maximum Load Support
  • From: "Asmelash, Abel" <Abel.Asmelash@compaq.com>
• Resolving ISA card IRQ interference with PCI INTA# to IRQ assignment
  • From: Mike Jadon <mikej@umem.com>
• Fwd: Re: RE: Resolving ISA card IRQ interference with PCI INTA# to IRQ assignment
  • From: Mike Jadon <mikej@umem.com>
• RE: PCIX Maximum Load Support
  • From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
• Re: Resolving ISA card IRQ interference with PCI INTA# to IRQ assignment
  • From: Neal Palmer <neal@dinigroup.com>
• Re: Resolving ISA card IRQ interference with PCI INTA# to IRQ assignment
  • From: Carter Buck <CBuck@PLXTech.com>
• Yet another form factor?
  • From: "Monish Shah" <monish.shah@indranetworks.com>
• pci-x address order
  • From: Uttam Aggarwal <uttam.aggarwal@dcmtech.co.in>
• RE: Yet another form factor?
  • From: "SHEU,PHILIP (HP-Cupertino,ex3)" <psheu@hp.com>
• RE: Yet another form factor?
  • From: "SHEU,PHILIP (HP-Cupertino,ex3)" <psheu@hp.com>
• Re: Yet another form factor?
  • From: wamnet <wamnet@gte.net>
• removal
  • From: Jennet Shi <zh_shi@yahoo.com>
• Load Tuning of Non Bridge functions
  • From: "Kashif Ghafoor" <kasheeg@hotmail.com>
• Re: Re: access PCI memory from DOS
  • From: lecos@samsung.co.kr
• RE: Re: Re: access PCI memory from DOS
  • From: darkroom@ix.netcom.com
• PMC Spec - Characteristic Impedance Numbers?
  • From: Gord Wait <Gord_Wait@spectrumsignal.com>
• RE: PMC Spec - Characteristic Impedance Numbers?
  • From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
• PCI-X on PMC
  • From: Paul Weber <pweber@sbs.com>
• one more baby step and I an done
  • From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
• PCI bridge I/O space
  • From: Kit Richards <kit@nso.edu>
• RE: PCI bridge I/O space
  • From: Richard Walter <rwalter@brocade.com>
• RE: PMC Spec - Characteristic Impedance Numbers?
  • From: Lame Brooks-G14738 <Brooks_Lame-G14738@email.mot.com>
• RE: PCI bridge I/O space
  • From: Lame Brooks-G14738 <Brooks_Lame-G14738@email.mot.com>
• RE: PMC Spec - Characteristic Impedance Numbers?
  • From: Gord Wait <Gord_Wait@spectrumsignal.com>
• RE: PCI-X on PMC
  • From: Lame Brooks-G14738 <Brooks_Lame-G14738@email.mot.com>
• Dual PCI System
  • From: "Olson, Chris E" <chris.e.olson@lmco.com>
• Re: Dual PCI System
  • From: wamnet <wamnet@gte.net>
• RE: Dual PCI System
  • From: "SHEU,PHILIP (HP-Cupertino,ex3)" <psheu@hp.com>
• Re: one more baby step and I an done
  • From: "Marco Serafini - QR s.r.l" <r&d@qrverona.it>
• ¸desktopdesktopdesktopdesktopdesktopsamplesamplesamplesamplesamplesampledesktopdesktopdesktopsamplesamplesampledesktopsampledesktopsampledesktopsamplesampledesktopsampledesktopdesktopsamplesampledesktopsampledesktopdesktopdesktopdesktopdesktopsampledesktopwww.pcisig.comdesktop
  • From: <rminnich@lanl.gov>
• low profile PCI spec
  • From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
• Re: low profile PCI spec
  • From: Joseph_W_Schulingkamp <jschulingkamp@agere.com>
• Overcoming PCI loading Limitations!!
  • From: Ranjan Natarajan <ranjan@PLXTech.com>
• RE: low profile PCI spec
  • From: Lame Brooks-G14738 <Brooks_Lame-G14738@email.mot.com>
• Re: low profile PCI spec
  • From: "Monish Shah" <monish.shah@indranetworks.com>