Mail Index
[Prev Page][Next Page]
- Re: Why cannot Target change its mind
- From: Joseph W Schulingkamp <jschulingkamp@agere.com>
- RE: Why cannot Target change its mind
- From: Srikiran Dravida <SrikiranD@ami.com>
- RE: Why cannot Target change its mind
- From: "Brian Small" <small@quicklogic.com>
- Re: Why cannot Target change its mind
- From: "Weng" <wtx@umem.com>
- Re: Why cannot Target change its mind
- From: Gérard Roudier <groudier@club-internet.fr>
- Why cannot Target change its mind
- From: "Weng" <wtx@umem.com>
- qualification/characterization of pci cards
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- Important Information: .BIZ .INFO Domain Extensions
- From: "NewRegistryExtensions.com" <newregistryextensions@yahoo.com>
- Re: Software Help
- From: "Emmanuel Lecomte" <emmanuel.lecomte@mvd-fpga.com>
- Re: Software Help
- From: "J. J. Farrell" <jjf@hal.com>
- Software Help
- From: "Bearzi, Anthony" <abearzi@harris.com>
- Re: Read Speed
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: Read Speed
- From: Neal Palmer <neal@dinigroup.com>
- Re: Mixed byte enables during PCI burst transaction
- From: lecos@samsung.co.kr
- Re: Read Speed
- From: "Weng" <wtx@umem.com>
- Re: Read Speed
- From: Neal Palmer <neal@dinigroup.com>
- Mixed byte enables during PCI burst transaction
- From: Tim Fairfield <fairfield@canada.com>
- Re: Read Speed
- From: "Weng" <wtx@umem.com>
- Re: Read Speed
- From: Neal Palmer <neal@dinigroup.com>
- Re: Read Speed
- From: "Thomas J. Merritt" <tjm@codegen.com>
- Re: Read Speed
- From: fmnemeth@collins.rockwell.com
- Read Speed
- From: André David <Andre.David@cern.ch>
- Bridge/BIOS issue
- From: brad yu <bradyu2001@yahoo.com>
- Bridge/BIOS issue
- From: "Andrew Krenz" <a.krenz@aristoslogic.com>
- Re: 33/66MHz operation.
- From: Neal Palmer <neal@dinigroup.com>
- RE: 33/66MHz operation.
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- 33/66MHz operation.
- From: "GEORGE, Peter (Newcastle)" <Peter.George@leoniwiring.co.uk>
- RE: 66MHz PCI timing
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Compact PCI and Hot Swap spec
- Re: Initialization Phase versus Run Time Phase
- From: "Weng" <wtx@umem.com>
- 66MHz PCI timing
- From: James Murray <jmurray@triscend.com>
- Initialization Phase versus Run Time Phase
- From: James Murray <jmurray@triscend.com>
- CPLD for implementing Arbiter
- From: Jeff Siegel <jeff@optosphere.com>
- RE: bridge heirarchy
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- bridge heirarchy
- From: "K. C. Sriram" <sriram@cpmail.cyberpathinc.com>
- oldendorf.org; domain for sale
- From: "Joe Wood" <nightlife199@compuserve.de>
- Configuration accesses not working
- From: Paul Slade <dartcom@excite.com>
- RE: Arbitration pin requirements
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Mini-PCI modem
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: Arbitration pin requirements
- From: fmnemeth@collins.rockwell.com
- Re: CPCI term resistors
- From: fmnemeth@collins.rockwell.com (by way of Daniel Weaver <dan.weaver@znyx.com>)
- Re: is it correct way of connecting on the PCI ?
- From: Steven Waritz <saw@bearpaw.Eng.Sun.COM>
- RE: CPCI term resistors
- From: tlyungha@collins.rockwell.com
- 66MHz target latency
- From: James Murray <jmurray@triscend.com>
- RE: Arbiter Question, IRDY#, FRAME#
- From: "K. C. Sriram" <sriram@cpmail.cyberpathinc.com>
- Re: Arbiter Question, IRDY#, FRAME#
- From: "Peter Marek" <peter.marek@marekmicro.de>
- RE: CPCI term resistors
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Arbiter Question, IRDY#, FRAME#
- From: James Murray <jmurray@triscend.com>
- Arbitration pin requirements
- From: James Murray <jmurray@triscend.com>
- Re: CPCI term resistors
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- is it correct way of connecting on the PCI ?
- From: "K. C. Sriram" <sriram@cpmail.cyberpathinc.com>
- RE: CPCI term resistors
- From: "K. C. Sriram" <sriram@cpmail.cyberpathinc.com>
- RE: CPCI term resistors
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- RE: Programmable BARS
- From: Addison Chen <addison@netconvergence.com>
- CPCI term resistors
- From: "Jeff Leine" <jeff.leine@lecroy.com>
- SAA7146
- From: "Prabhakar K" <prabhak@lgsi.co.in>
- RE: PCI under reset
- From: "Olaf Birkeland" <olaf.birkeland@fast.no>
- RE: PCI under reset
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- PCI under reset
- From: Michael Yin <Michaely@teralogic-inc.com>
- Question regarding PCI Male-Male connector
- From: neelay.das@philips.com
- RE: Question on BGA pinout for 66MHz PCI
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Re: Question on BGA pinout for 66MHz PCI
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- Re: Question on BGA pinout for 66MHz PCI
- From: tony@burched.com.au (burched - tony burch)
- RE: Programmable BARS
- From: Addison Chen <addison@netconvergence.com>
- Question on BGA pinout for 66MHz PCI
- From: James Murray <jmurray@triscend.com>
- PCI Hot plug controller on PCI-X
- From: "=?iso-2022-jp?B?GyRCJGIkaiRkJF4bKEIgGyRCJD8kKyQ3GyhC?=" <arisatoshi@hotmail.com>
- Latency Timer Assignment
- From: "Premadhas Mohunraj" <premadhas.mohunraj@wipro.com>
- Why have multiple BARs RE: Programmable BARS
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Re: Programmable BARS
- From: "J. J. Farrell" <jjf@hal.com>
- RE: Programmable BARS
- From: Gord Wait <Gord_Wait@spectrumsignal.com>
- Re: Programmable BARS
- From: Henry Gong <hgong@cisco.com>
- Re: Programmable BARS
- From: James Murray <jmurray@triscend.com>
- Re: Programmable BARS
- From: "Weng Tianxiang" <wtx@umem.com>
- RE: Programmable BARS
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Programmable BARS
- From: James Murray <jmurray@triscend.com>
- RE: PCI vs Cardbus
- From: Philip Decker <pdecker@wavewireless.com>
- PCI vs Cardbus
- From: <"CN=Jing Ruan/OU=WPD/OU=SC/O=PHILIPS@AMEC"@unregistered.philips.com>
- RE: PCI Edge Fingers for Thicker than standard PWB
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- PCI Edge Fingers for Thicker than standard PWB
- From: "GARY VANREMORTEL" <grv@appsig.com>
- Re: PCI board outline
- From: wamnet <wamnet@gte.net> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- Re: PCI board outline
- From: wamnet <wamnet@gte.net>
- Re: PCI board outline
- From: tony@burched.com.au (burched - tony burch)
- Re: PCI board outline
- From: Henry Gong <hgong@cisco.com>
- PCI board outline
- From: Duncan Ross <dro@star.le.ac.uk>
- Re: PCI interruptions between two PCI expansion boards
- From: "Amit Agrawal" <amita@lightsand.com>
- PCI I/O buffers expereience
- From: "Amit Agrawal" <amita@lightsand.com>
- Re: PCI interruptions between two PCI expansion boards
- From: Marco Brambilla <divacon1@sh.bel.alcatel.be>
- Re: PCI interruptions between two PCI expansion boards
- From: Neal Palmer <neal@dinigroup.com>
- RE: PCI interruptions between two PCI expansion boards
- From: Richard Walter <rwalter@brocade.com>
- PCI interruptions between two PCI expansion boards
- From: michael.pellegrino@modicon.com
- (No Subject)
- From: "BANESHWAR M SHANBHAG" <baneshwar.s@lycos.com>
- PnP with MPC107
- From: Marc Reviel <marc@powerlogix.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- RE:
- From: "Ramasubramanian,S" <SRamasubramanian@Corvis.com>
- RE:
- From: "Ramasubramanian,S" <SRamasubramanian@Corvis.com>
- Re: Hot Plug Compliant Silicon
- From: Henry Gong <hgong@cisco.com>
- No Subject
- From: "Ramasubramanian,S" <SRamasubramanian@Corvis.com>
- RE: Hot Plug Compliant Silicon
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Re: Bridge versus Simple Device
- From: James Murray <jmurray@triscend.com>
- RE: Bridge versus Simple Device
- From: Horkel Milan <m.horkel@decros.cz>
- Hot Plug Compliant Silicon
- From: brad yu <bradyu2001@yahoo.com>
- PCI Device Status Register
- From: Manfred Kuhland <man@atlantek.com.au>
- Bridge versus Simple Device
- From: James Murray <jmurray@triscend.com>
- No Subject
- From: "Ramasubramanian,S" <SRamasubramanian@Corvis.com>
- GSYNC problem
- From: Goran Grbic <grbic@mosaid.com>
- Inexpensive PowerPC PCI Bridge/Memory Controller
- From: Marc Reviel <marc@powerlogix.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- Hot-Plug PCI / Hot-Swap PCI
- From: James Murray <jmurray@triscend.com>
- Question on VPD
- From: "Deepesh Tiwari" <deepesh@us.ibm.com>
- Re: NMI on PCI
- From: Bob Smith <bsmith@sudleyplace.com>
- Re: pci - ide controller
- From: "Frank Story" <frank.story@acoustictech.com>
- RE: NMI on PCI
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- RE:NMI on PCI
- From: "John Bush" <john_b@bvmltd.co.uk>
- Re: pci - ide controller
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- pci - ide controller
- From: "BANESHWAR M SHANBHAG" <baneshwar.s@lycos.com>
- RE: NMI on PCI
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Re: NMI on PCI
- From: Tom Keaveny <tak@rtl.rose.agilent.com>
- NMI on PCI
- From: Bob Smith <bsmith@sudleyplace.com>
- Can you send me the PCI local bus specification revision2.1?
- From: Arun Kumar A D <aarun@cisco.com>
- RE: PCI Bus Layout Question
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Re: target single data
- From: "Weng Tianxiang" <wtx@umem.com>
- PCI cards (PCB only) length
- From: "Dr. Gerhart Hlawatsch" <ghl@scitel.de>
- PCI Bus Layout Question
- From: "Markou, Pete" <Pete.Markou@GD-CS.COM>
- target single data
- From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
- Re: Disconnect With Data Even if not a Burst?
- From: Amit Shah <amits@agere.com>
- Disconnect With Data Even if not a Burst?
- From: Louis Przebienda <lprzebienda@acromag.com>
- Ref Design
- From: Goran Grbic <grbic@mosaid.com>
- VHDL Simulation Model
- From: Mike Jadon <mikej@umem.com>
- Re: question for programming the DMA controller
- From: "Weng Tianxiang" <wtx@umem.com>
- question for programming the DMA controller
- From: "Zhang Jun" <zhjun@sd.mech.tohoku.ac.jp>
- RE: USB standard
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- USB standard
- From: "Anand Acharya" <anandacharya@controlnet.co.in>
- miniPCI Type III Connector?
- From: Philip Decker <pdecker@wavewireless.com>
- Re: testing tools
- From: Manfred Kuhland <man@atlantek.com.au>
- Re: testing tools
- From: Barbara Aichinger <barb@futureplus.com>
- Re: PCI - decoupling of unused 3.3V connector pads
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- testing tools
- From: Frederic Khoury <kfrederi@CAE.CA>
- RE: PCI - decoupling of unused 3.3V connector pads
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- PCI - decoupling of unused 3.3V connector pads
- From: tony@burched.com.au (burched - tony burch)
- Unidentified subject!
- From: prabhala rajendra <rpraghuram@yahoo.com>
- RE: Looking for PCI Utility software
- From: "ofer magazanik" <e-m-law@zahav.net.il>
- Re: PCI-X I/O pads
- From: Amit Shah <amits@agere.com>
- Freely programmable Arbiter
- From: "Sebastian Schoenberg" <schoenbg@lycos.com>
- RE: Sensing Interrupt Pins that is not in your trace?
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Re: PCI-X I/O pads
- From: "Ajit Madhekar" <ajit@controlnet.co.in>
- Re: Sensing Interrupt Pins that is not in your trace?
- From: "J. J. Farrell" <jjf@hal.com>
- RE: Sensing Interrupt Pins that is not in your trace?
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- RE: PCI-X I/O pads
- From: Neal Palmer <neal@dinigroup.com>
- RE: PCI-X I/O pads
- From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
- RE: PCI-X I/O pads
- From: Ganesan Viswanathan <ganesanv@ami.com>
- RE: PCI-X I/O pads
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- RE: Sensing Interrupt Pins that is not in your trace?
- From: Horkel Milan <m.horkel@decros.cz>
- PCI-X I/O pads
- From: "Vikas M" <vikas_mj@yahoo.com>
- Sensing Interrupt Pins that is not in your trace?
- From: "Addison Chen" <addison@netconvergence.com>
- air-gap for esd fingers of compact PCI boards
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- RE: Tval test circuits
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- RE: Looking for PCI Utility software
- From: Dave New <NewD@esi.com>
- PCI Bus Master DMA
- From: SHIBU BABY <shibub@nestec.net>
- Tval test circuits
- From: Robert Lindsell <robertl@research.canon.com.au>
- CPCI Mechanicals
- From: Al Keyworth <Al.Keyworth@measurementcomputing.com>
- Re: Fw: a VHDL puzzle
- From: Neal Palmer <neal@dinigroup.com>
- RE: Ref. Doc. for "#" for active low
- From: Philip Decker <pdecker@wavewireless.com>
- RE: a VHDL puzzle
- From: Tom Curran <tom_curran@memecdesign.com>
- RE: Looking for PCI Utility software
- From: "Jim Boemler" <boemler@vnet.ibm.com>
- a VHDL puzzle
- From: "Weng Tianxiang" <wtx@umem.com>
- Looking for PCI Utility software
- From: Jeff Siegel <jeff@optosphere.com>
- RE: Ref. Doc. for "#" for active low
- From: Shepard Bob-G14751 <Bob.Shepard@motorola.com>
- Re: a VHDL puzzle
- From: "AL Pham" <alp_jm@yifan.net>
- Re: Fw: a VHDL puzzle
- From: "Weng Tianxiang" <wtx@umem.com>
- Re: Fw: a VHDL puzzle
- From: Kevin Normoyle <Kevin.Normoyle@Eng.Sun.COM>
- Fw: a VHDL puzzle
- From: "Weng Tianxiang" <wtx@umem.com>
- No Subject
- From: "david" <ndavid@eth.net.in>
- RE: PCI bus loading
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- No Subject
- From: "david" <ndavid@eth.net.in>
- PCI bus loading
- From: "Nguyen, Son N." <snnguyen@cp10.es.xerox.com>
- FW: Problems with i21154 bridge (II)
- From: Jim Sather <jsather@sbs.com>
- Problems with i21154 bridge (II)
- From: Jose Franciso Toledo Alarcon <Jose.Toledo@cern.ch>
- Re: Ref. Doc. for "#" for active low
- From: "J. J. Farrell" <jjf@bcs.org.uk>
- Want to quit the list
- From: nabaut@attglobal.net
- RE: Problems with i21154 bridge
- From: Shepard Bob-G14751 <Bob.Shepard@motorola.com>
- Ref. Doc. for "#" for active low
- From: Philip Decker <pdecker@wavewireless.com>
- cash by fax info
- From: cashbyfax22222@aol.com
- RE: Any PCI specs violation? -- a prove on its violation
- From: "Francois Barlow" <fbarlow@matrox.com>
- Fw: Any PCI specs violation? -- a prove on its vaiolation
- From: "Weng Tianxiang" <wtx@umem.com>
- Re: Problems with i21154 bridge
- From: Neal Palmer <neal@dinigroup.com>
- RE: Any PCI specs violation? -- a prove on its vaiolation
- From: "Francois Barlow" <fbarlow@matrox.com>
- PCI/FPDP
- From: "Olson, Chris E" <chris.e.olson@lmco.com>
- Re: Problems with i21154 bridge
- From: Jose Franciso Toledo Alarcon <Jose.Toledo@cern.ch>
- Re: Any PCI specs violation? -- a prove on its vaiolation
- From: "Weng Tianxiang" <wtx@umem.com>
- Re: 3.3V PCI
- From: Anthony Moulds <anthony@cs.york.ac.uk>
- What is MicroPCI?
- From: Henry Gong <henry.gong@radiata.com>
- RE: 3.3V PCI
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Re: 3.3V PCI
- From: Neal Palmer <neal@dinigroup.com>
- RE: 3.3V PCI
- From: KC Chang <kc.chang@tundra.com>
- RE: 3.3V PCI
- From: "Peterson, George W" <george.w.peterson@intel.com>
- Re: 3.3V PCI
- From: Richard Blackborow <richard@alacritech.com>
- RE: Delayed Read Timeout
- From: "James Lam(SC)" <james.lam@o2micro.com>
- RE: 3.3V PCI
- From: KC Chang <kc.chang@tundra.com>
- 3.3V PCI
- From: Paul Capes <pcapes@ics-ltd.com>
- RE: Any PCI specs violation?
- From: "Francois Barlow" <fbarlow@matrox.com>
- RE: Calling the PCI BIOS under Windows NT 4.0 / Windows 2000
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- RE: Delayed Read Timeout
- From: Tony Clark <Tony.Clark@EFI.COM>
Mail converted by MHonArc 2.5.2