Mail Index
[Prev Page][Next Page]
- Re: Any PCI specs violation?
- From: Olaf Reichenbaecher <Olaf.Reichenbaecher@sci-worx.com>
- Delayed Read Timeout
- From: duncan <duncan@mediaone.net>
- PCI Bandwidth Usage
- From: "Don Wright" <dwright@seistl.com>
- RE: Calling the PCI BIOS under Windows NT 4.0 / Windows 2000
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- RE: Calling the PCI BIOS under Windows NT 4.0 / Windows 2000
- From: Dave New <NewD@esi.com>
- RE: Calling the PCI BIOS under Windows NT 4.0 / Windows 2000
- From: Keith Jasinski <jasinski@mortara.com>
- Calling the PCI BIOS under Windows NT 4.0 / Windows 2000
- From: maximino.castro@ni.com
- Any PCI specs violation?
- From: "Weng Tianxiang" <wtx@umem.com>
- RE: PCI 3.3V Supply Rail Tolerance (resend)
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- non-PCI Ethernet controller for Drozdov
- From: "Wagnon, Greg" <greg.wagnon@intel.com>
- Re: Embedded Ethernet controllers
- From: Udi Finkelstein <udif@bigfoot.com>
- RE: Embedded Ethernet controllers
- From: Arius - Rick Collins <rick.collins@arius.com>
- PCI 3.3V Supply Rail Tolerance (resend)
- From: Richard Blackborow <richard@alacritech.com>
- PC reset
- From: Goran Grbic <grbic@mosaid.com>
- RE: Embedded Ethernet controllers
- From: "Wagnon, Greg" <greg.wagnon@intel.com>
- Embedded Ethernet controllers
- From: Eric_Drozdov@alliedtelesyn.com (Eric Drozdov)
- FREE! REFER FREE VISA CARD, MAKE $10.00
- From: <success3004@hotmail.com>
- How to trade-off between a long timeout of TRDY response and system bandwidth holdingup time?
- From: yang.can.mei@philips.com
- What is MicroPCI?
- From: Henry Gong <henry.gong@radiata.com>
- PCI 3.3V Supply Rail Tolerance
- From: Richard Blackborow <richard@alacritech.com>
- Plugfest
- From: KC Chang <kc.chang@tundra.com>
- vga on pci references?
- From: Tom Curran <tom_curran@memecdesign.com>
- PWB Stiffeners
- From: Mike Dini <mdini@dinigroup.com>
- RE: 21154 Bridge SCLK Power-up Errata
- From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
- Re: Question about 3.3V Aux
- From: Michael Richardson <mcr@research.solidum.com>
- PCI Bus Performance
- From: "Don Wright" <dwright@seistl.com>
- Question about 3.3V Aux
- From: Eric_Drozdov@alliedtelesyn.com (Eric Drozdov)
- Flash Card ? (not IDE drive emulator)
- From: Philip Decker <pdecker@wavewireless.com>
- Re: very slow response of memory read with VIA KT133 chipset
- From: "Weng Tianxiang" <wtx@umem.com>
- very slow response of memory read with VIA KT133 chipset
- From: yang.can.mei@philips.com
- 1st Annual International Linux Plug Fest
- From: Melissa Almgren <melissa@linuxcare.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- RE: Help on 21554
- From: Shepard Bob-G14751 <Bob.Shepard@motorola.com>
- RE: 21154 Bridge SCLK Power-up Errata
- From: Shepard Bob-G14751 <Bob.Shepard@motorola.com>
- 21154 Bridge SCLK Power-up Errata
- From: Mike Dini <mdini@dinigroup.com>
- Fwd: pci bandwidth calculations
- From: Alan Deikman <Alan.Deikman@znyx.com>
- pci bandwidth calculations
- From: Tom Curran <tom_curran@memecdesign.com>
- Re: Maximum Power for add in card more than 25W
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- RE: Maximum Power for add in card more than 25W
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- 66MHz PCI Board
- From: Amit Shah <amits@agere.com>
- FW: Maximum Power for add in card more than 25W
- From: Jim Sather <jsather@sbs.com>
- Re: Maximum Power for add in card more than 25W
- From: Anthony Moulds <anthony@cs.york.ac.uk>
- RE: Maximum Power for add in card more than 25W
- From: Richard Walter <rwalter@Brocade.COM>
- Re: Maximum Power for add in card more than 25W
- From: Klaus Bahner <kgb@tcelectronic.dk>
- Maximum Power for add in card more than 25W
- From: brad yu <bradyu2001@yahoo.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- RE: Help on 21554
- From: Christophe.LINDHEIMER@tcc.thomson-csf.com
- RE: IBM SAGE 1955
- From: "Frazee, Walt" <Walt@VistaControls.com>
- RE: IBM SAGE 1955
- From: "Frazee, Walt" <Walt@VistaControls.com>
- Fwd: Help on 21554
- From: Alan Deikman <Alan.Deikman@znyx.com>
- Help on 21554
- From: Christophe.LINDHEIMER@tcc.thomson-csf.com
- IBM SAGE 1955
- From: Kevin Normoyle <Kevin.Normoyle@Eng.Sun.COM>
- Re: Footnote RE: Legacy Terminology RE: DMA across PCI
- From: Kevin Normoyle <Kevin.Normoyle@Eng.Sun.COM>
- TI PCI-2050
- From: "Scot Crowner" <scrowner@drti.com>
- Re: Footnote RE: Legacy Terminology RE: DMA across PCI
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: Footnote RE: Legacy Terminology RE: DMA across PCI
- From: dpannell@marvell.com
- Updating data
- From: Digital Aryan <digitalaryan@yahoo.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- Footnote RE: Legacy Terminology RE: DMA across PCI
- From: "Schneider, Dave" <Dave.Schneider@emulex.com>
- Re: How to achieve a long burst?
- From: "Weng Tianxiang" <wtx@umem.com>
- RE: How to achieve a long burst?
- From: "Clark, Raymond J (WBST)" <Raymond.Clark@usa.xerox.com>
- Re: How to achieve a long burst?
- From: "Peter Marek" <peter.marek@marekmicro.de>
- Re: How to achieve a long burst?
- From: "Scott C. Karlin" <scott@CS.Princeton.EDU>
- RE: Show me the document RE: Legacy Terminology RE: DMA across PCI
- From: Austin Franklin <austin@darkroom.com>
- Re: How to achieve a long burst?
- From: "Peter Marek" <peter.marek@marekmicro.de>
- Re: Show me the document RE: Legacy Terminology RE: DMA across PCI
- From: "J. J. Farrell" <jjf@bcs.org.uk>
- Show me the document RE: Legacy Terminology RE: DMA across PCI
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- RE: Legacy Terminology RE: DMA across PCI
- From: Gord Wait <Gord_Wait@spectrumsignal.com>
- RE: Legacy Terminology RE: DMA across PCI
- From: "John Cappello" <jdc_odi@hotmail.com>
- RE: DMA across PCI
- From: Austin Franklin <austin@darkroom.com>
- RE: Legacy Terminology RE: DMA across PCI
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Re: DMA across PCI
- From: Neal Palmer <neal@dinigroup.com>
- Re: Legacy Terminology RE: DMA across PCI
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- Re: DMA across PCI
- From: "Weng Tianxiang" <wtx@umem.com>
- Legacy Terminology RE: DMA across PCI
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- RE: <OFFTOPIC>? How to achieve a long burst
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- DMA across PCI
- From: "Daniel DeConinck" <daniel.deconinck@sympatico.ca>
- Re: How to achieve a long burst?
- From: Neal Palmer <neal@dinigroup.com>
- Re: How to achieve a long burst?
- From: "Scott C. Karlin" <scott@CS.Princeton.EDU>
- Re: How to achieve a long burst?
- From: Klaus Bahner <kgb@tcelectronic.dk>
- Re: How to achieve a long burst <OFFTOPIC>?
- From: "Scott C. Karlin" <scott@CS.Princeton.EDU>
- Re: How to achieve a long burst <OFFTOPIC>?
- From: "Schaefer, Peter" <Peter.Schaefer.tiscon_ag@vs.dasa.de>
- Re: How to achieve a long burst?
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- Re: How to achieve a long burst?
- From: "Peter Marek" <peter.marek@marekmicro.de>
- RE: How to achieve a long burst?
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- How to achieve a long burst?
- From: Henry Gong <henry.gong@radiata.com>
- Fwd: I2C bus
- From: Alan Deikman <Alan.Deikman@znyx.com>
- I2C bus
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- RE: PCI 32/33 universal extender card for HP 16550A Logic Analyzer
- From: Austin Franklin <austin@darkroom.com>
- RE: PCI 32/33 universal extender card for HP 16550A Logic Analyzer
- From: Tony Clark <Tony.Clark@EFI.COM>
- Re: PCI 32/33 universal extender card for HP 16550A Logic Analyzer
- From: Neal Palmer <neal@dinigroup.com>
- PCI 32/33 universal extender card for HP 16550A Logic Analyzer
- From: "Jeffrey Journey" <jjourney@us.ibm.com>
- Re: PCI conformance workshop
- From: "Udi Barel" <r51365@email.sps.mot.com>
- microPCI spec?
- From: Philip Decker <pdecker@wavewireless.com>
- RE: What is real lowest speed of PCI?
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Dear experts, pls help!
- From: "See Seng Chee" <seesc@singnet.com.sg>
- PCI conformance workshop
- From: "Hilel Avni" <r58467@email.sps.mot.com>
- Re: What is real lowest speed of PCI?
- From: Patrick Maupin <pmaupin@speakeasy.net>
- What is real lowest speed of PCI?
- From: Henry Gong <henry.gong@radiata.com>
- Re: Trhfa for PCI-X
- From: Jason Baumbach <gjb@cypress.com>
- Re: Trhfa for PCI-X
- From: Jason Baumbach <gjb@cypress.com>
- Pci-to-pci bridge ... compliancy checklist?
- From: "Martijn Emons" <martijn.emons@arcobel.nl>
- RE: Straddle Mount PCI Connector, +3.3V 64-bit
- From: "Olaf Birkeland" <Olaf.Birkeland@fast.no>
- Trhfa for PCI-X
- From: Jason Baumbach <gjb@cypress.com>
- PCI Extender cards with hot plug capability
- From: Keith Jasinski <jasinski@mortara.com>
- RE: Straddle Mount PCI Connector, +3.3V 64-bit
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Straddle Mount PCI Connector, +3.3V 64-bit
- From: Mike Dini <mdini@dinigroup.com>
- Re: REQ64# <-> ACK64# - handshake-mechanism in performing a single 64-bit (Write)-Transfer
- From: "Weng Tianxiang" <wtx@umem.com>
- Re: REQ64# <-> ACK64# - handshake-mechanism in performing a single 64-bit (Write)-Transfer
- From: "Weng Tianxiang" <wtx@umem.com>
- REQ64# <-> ACK64# - handshake-mechanism in performing a single 64-bit (Write)-Transfer
- From: Kirchmayer Markus <markus.kirchmayer@mchr2.siemens.de>
- Re: available slots
- From: "Eric de Jong" <info@simultime.nl>
- RE: Which OS are running in the compliance workshop
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Which OS are running in the compliance workshop
- From: "Noam Efrati (r57983)" <r57983@email.sps.mot.com>
- PCI 2.1 Vs PCI 2.2
- From: Yang Li <yang_li1@yahoo.co.uk>
- RE: available slots
- From: Sagit Kaniel <sagit@jungo.com>
- RE: available slots
- From: Dave New <NewD@esi.com>
- Re: available slots
- From: Patrick Maupin <pmaupin@speakeasy.net>
- Re: available slots
- From: Sagit Kaniel <sagit@jungo.com>
- experience with OR3TP12 -- motherboard compatibility
- Generation of IDSEL by bridge
- From: Ajit Khaparde <digitalaryan@yahoo.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- Re: available slots
- From: Patrick Maupin <pmaupin@speakeasy.net>
- Re: available slots
- From: Sagit Kaniel <sagit@jungo.com>
- PCI device powerup
- From: Jason Baumbach <gjb@cypress.com>
- PCI clock distribution
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- RE: Expansion ROM not started
- From: "O'Shea, David J" <david.j.oshea@intel.com>
- Innovative GSM Solutions
- From: David Prenes <dprenes@3wood.com>
- Expansion ROM not started
- From: "ANCUD " <ancud@ru.ru>
- 8240 rev. 1.0 errata
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: DeviceID in a multi-function device.
- From: Patrick Maupin <pmaupin@speakeasy.net>
- Re: DeviceID in a multi-function device.
- From: Udi Finkelstein <udif@bigfoot.com>
- Re: PCI config space and expansion ROM problem
- From: Patrick Maupin <pmaupin@speakeasy.net>
- Re: available slots
- From: Patrick Maupin <pmaupin@speakeasy.net>
- DeviceID in a multi-function device.
- From: Richard Walter <rwalter@Brocade.COM>
- Re: PCI config space and expansion ROM problem
- From: "Weng Tianxiang" <wtx@umem.com>
- PCI config space and expansion ROM problem
- From: "Ajit Madhekar" <ajit@controlnet.co.in>
- available slots
- From: "David Huebel" <dhuebel@austin.rr.com>
- PCI-ISA
- From: Sasin Chimprabha <SasinC@thmulti.com.sg>
- RE: BGA Assembly
- From: "John Haddy" <john.haddy@radiata.com>
- RE: BGA Assembly
- From: Tom Stamp <toms@optiscan.com>
- RE: BGA Assembly
- From: "John Haddy" <john.haddy@radiata.com>
- PCI BIOS address ranges
- From: Sebastien Fauris <sfauris@club-internet.fr>
- RE: BGA Assembly
- From: Rick Collins - Arius <PCImail@arius.com>
- RE: BGA Assembly
- From: Philip Decker <pdecker@wavewireless.com>
- Re: BGA Assembly
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- Re: BGA Assembly
- From: Norbert Pieth <nop@first.gmd.de>
- RE: BGA Assembly
- From: Peter Ross <peter.ross@imshq.ftech.co.uk>
- RE: BGA Assembly
- From: Peter Ross <peter.ross@imshq.ftech.co.uk>
- Re: BGA Assembly
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- RE: BGA Assembly
- From: "John Haddy" <john.haddy@radiata.com>
- Re: BGA Assembly
- From: Dimiter Popoff <tgi_earth@yahoo.com>
- pci-sig´Ô ¾È³çÇϼ¼¿ä?
- From: "Online Korea"<olk@olk.co.kr>
- BGA Assembly
- From: anthony@cs.york.ac.uk
- RE: interrupt on demand
- From: Lame Brooks-G14738 <brooks.lame@motorola.com>
- Re: vpd query
- From: Neal Palmer <neal@dinigroup.com>
- RE: 66MHz or 33MHz PCI Bus
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Re: interrupt on demand
- From: Drew Eckhardt <drew@PoohSticks.ORG>
- Re: vpd query
- From: Mario da Costa <mario@controlnet.co.in>
- Re: interrupt on demand
- From: "Martijn Emons" <martijn.emons@arcobel.nl>
- interrupt on demand
- From: "J. J. Farrell" <jjf@hal.com>
- Re: 66MHz or 33MHz PCI Bus
- From: Michael Richardson <mcr@sandelman.ottawa.on.ca>
- Message Signaling Interrupt and PCI-X bridge
- From: Tai Phan <phan@iphase.com>
- PCI-AGP/PIII bus specs
- From: Marc Reviel <marc@powerlogix.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- RE: 66MHz or 33MHz PCI Bus
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- unregister
- From: "Mohammad Hasson" <mhasson@cccglobal.com>
- Re: Merging of two 32-bits to form one 64-bit data
- From: craig.conway@ni.com (by way of Daniel Weaver <dan.weaver@znyx.com>)
- 66MHz or 33MHz PCI Bus
- From: brad yu <bradyu2001@yahoo.com> (by way of Daniel Weaver <dan.weaver@znyx.com>)
- RE: Spread Spectrum PCI clock
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- Spread Spectrum PCI clock
- From: Ted Firlit <firlit@utmc.aeroflex.com>
- Expansion ROM code format
- From: "Wood, Stephen" <swood07@harris.com>
- Re: vpd query
- From: yang.can.mei@philips.com
- Philips SAA7146?
- From: Peter Britton <peter.britton@motion-media.com>
- vpd query
- From: Mario da Costa <mario@controlnet.co.in>
- Relates to cache line and MWI
- From: Ajit Khaparde <akhaparde@platysindia.com>
- RE: Utility for Serial Eprom PCI configuration (24c01 series)
- From: "Perkalskite, Alexander" <aperkalskite@ndsisrael.com>
- RE: Utility for Serial Eprom PCI configuration (24c01 series)
- From: "John Bush" <john_b@bvmltd.co.uk>
- RE: Utility for Serial Eprom PCI configuration (24c01 series)
- From: Pieter de Kock <Pieter.deKock@datavoice.co.za>
- Any problems using AMCC S5920 PCI chip ??
- From: Mark Werner <mark.werner@ssec.wisc.edu>
- Re: Utility for Serial Eprom PCI configuration (24c01 series)
- From: Alex Horvath <ahorvath@cisco.com>
- Re: Merging of two 32-bits to form one 64-bit data
- Re: Merging of two 32-bits to form one 64-bit data
- From: Udi Finkelstein <udif@bigfoot.com>
- Re: Merging of two 32-bits to form one 64-bit data
- From: "Martijn Emons" <martijn.emons@arcobel.nl>
- Merging of two 32-bits to form one 64-bit data
- From: Ajit Khaparde <akhaparde@platysindia.com>
- Wake on Lan problems
- From: Eric_Drozdov@alliedtelesyn.com (Eric Drozdov)
- Utility for Serial Eprom PCI configuration (24c01 series)
- From: Mark.Preibisius@conexant.com
- RE: PCI clock
- From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
- PCI clock
- From: "Eick, Sagy" <sagy.eick@intel.com>
- PCI clock
- From: "Eick, Sagy" <sagy.eick@intel.com>
- Recall: PCI clock
- From: "Eick, Sagy" <sagy.eick@intel.com>
- Re: Unidentified subject!
- From: Dan Mick <Dan.Mick@West.Sun.COM>
- RE: Unidentified subject!
- From: Dave New <NewD@esi.com>
- Re: Unidentified subject!
- From: Duane Clark <dclark@akamail.com>
- RE: Unidentified subject!
- From: Dave New <NewD@esi.com>
- Unidentified subject!
- From: "Jeff Leine" <jeff.leine@lecroy.com>
- Fwd: Second Site
- Re: Multi-function support in PCI
- From: Lloyd Bircher <nicad2@yahoo.com>
- RE: Multi-function support in PCI
- From: "Termathe, Gerd" <Gerd.Termathe@fujitsu-siemens.com>
- Multi-function support in PCI
- From: "Madhura Bokil" <madhura@controlnet.co.in>
- protocol related (VPD)
- From: Mario da Costa <mario@controlnet.co.in>
- MSI and VPD
- From: Mario da Costa <mario@controlnet.co.in>
- Re: timing question
- From: Steve Blightman <steve@alacritech.com>
- RE: Selfish PCI Cards
- From: Dave New <NewD@esi.com>
- Re: Implementing a PCI bus using FPGA logic
- From: "Gaurav" <gaurav@mds.memec.co.in>
- WinNT Utility to program Intel 21554 serial ROM
- From: Susan Suinn <ssuinn@jetstream.com>
Mail converted by MHonArc 2.5.2