Re: Re[2]: PCI Interrupts

[henrylau@cts.com (Henry Lau)]

At 06:51 PM 9/30/96 EST, mrose@nectech.com wrote:
>     Henry,
>     
>     Now, if the Routing register(s), the ELCR, and the Intline registers 
>     are all setup, when the appropriate channel is unmasked (21h/A1h) and 
>     the PCI asserts its INTA line, the interrupt assigned in the Intline 
>     register should fire. Getting called from VPIC services is another 
>     matter.
>     
What do you mean by the VPIC services?  Virtual Programmable Interrupt
Controller?  How can I find out if VPIC services is setup properly?

Thank you
+-----------------------------------------+----------------------------+
| Henry Lau                               | Phone: 619-674-5000 x222   |
| Director of Software Development        | Fax:   619-674-5005        |
| METACOMP, Inc.                          | Email: henrylau@cts.com    |
| 10989 Via Frontera, San Diego, CA 92127 | http://www.metacompinc.com |
+-----------------------------------------+----------------------------+
OÜË