JTAG from PCI bus

[Ferran Lisa <ferran@cnm.es>]

> > I am developing a PCI board based on ALTERA reconfigurable devices, and
> > I'm very interested in JTAG standard for testing and configuring these
> > devices from PCI.
> >
> > In revision 2.1 of the PCI specification there is a small section about
> > this topic with a reference of a book called "PCI System Design Guide",
> > but I haven't found any information about this book in the PCI-SIG web
> > page.
> >
> > I would much appreciate if anybody could tell me how to get this guide.
> > Any other information about JTAG and PCI will also be welcome.


>John R Pierce wrote:
> 
> I believe that book may be available from Computer Literacy,
> http://www.clbooks.com
> 
> -jrp


First of all, thanks a lot for your fast replies.

The book at Comupter Literacy (the one that seems to apply) is a nice
book entitled:

    "PCI System Architecture."
    Tom Shanley, Don Anderson.
    Mindshare, Inc. 
    Addison-Wesley. 1995.

This is a very good book wich I personally recomend, But I'm afraid
this book hasn't more info about JTAG than the PCI 2.1 spec. Thanks
anyway, John.

So, my question is still on the table. Does anybody use JTAG to program
or test a FPGA from PCI bus? Where can I get the "PCI System Design
Guide" refered in the 2.1 PCI spec.?


// Ferran

================================================================
Ferran Lisa (Mr.)
Universidad Autonoma de Barcelona
Departamento de Informatica
Campus U.A.B. - Edificio C
08193 Bellaterra (Barcelona). Spain
Tel: +34 (3) 5813082
Fax: +34 (3) 5813033
E_mail: ferran@cnm.es
================================================================
„€m