[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 3.3V bypassing and bussing
- To: Mailing List Recipients <pci-sig-request@znyx.com>
- Subject: Re: 3.3V bypassing and bussing
- From: ross@teraflop.com (Ross Harvey)
- Date: Mon, 3 Mar 97 14:12 PST
- Resent-Date: Mon, 3 Mar 97 14:12 PST
- Resent-From: pci-sig-request@znyx.com
- Resent-Message-Id: <"rqq-62.0.tH.qpq6p"@dart>
- Resent-Sender: pci-sig-request@znyx.com
> On a 5 volt only card (PCI or PMC) the 3.3 volt pins need to be bypassed,
> but do they need to be bussed? I mean, as long as I have a bypass cap on
> each pin I shouldn't need to connect the pins together, right?
> opinions, anyone?
> -Ivor
No. Just follow the spec on proximity of the cap to the finger; you don't
need to connect them together. Obviously, if you want to share a cap
between several fingers, as least those fingers must connect!
½ œ Š