[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Bounce from 5V to 3.3V sign



Subject: Bounce from 5V to 3.3V signal switching          4/3/97    1:34 PM

I have the following question. If you have parts on a PCI bus that operate at
different voltages then you could potentially experience a significant bounce
(to as low at 0V) when a 5V part stops driving the bus and a 3.3V part starts,
switching a signal from 5V to 3.3V.  How would one handle this bounce?  Is it
a problem in the PCI spec? 
Thanks in advance.
Tom Wilson