[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
PMC Vio
- To: Mailing List Recipients <pci-sig-request@znyx.com>
- Subject: PMC Vio
- From: Ivor Bowden <ivor@peritek.com>
- Date: Thu, 26 Jun 1997 11:41:07 -0700
- Resent-Date: Thu, 26 Jun 1997 11:41:07 -0700
- Resent-From: pci-sig-request@znyx.com
- Resent-Message-Id: <"Ye6xw2.0.kV3.bWhip"@dart>
- Resent-Sender: pci-sig-request@znyx.com
Is this right?
On a PMC board with only a 3.3V keying hole
the Vio pins should be connected to the 3.3V plane.
On a PMC board with only a 5V keying hole
the Vio pins should be connected to the 5V plane.
On a PMC board with both a 3.3V and a 5V keying hole
the Vio pins should be connected only to the PCI buffer power pins.
Thanks,
-Ivor
Ivor Bowden
Peritek Corp
phone: (510) 531-6500
FAX: (510) 530-8563
email: ivor@peritek.com
Ñ Ä ´