PCI Interrupts

[Richard Collins - reDSP <redsp@usa.net>]

We are working on a PCI card using the PLX9080 chip for the PCI interface.
We are trying to test the use of interrupts and can't seem to get the hang
of PCI bus interrupts. We are generating the interrupt onto the PCI bus.
From there we don't seem to be able to connect it to our software. 

The software is being developed under a realtime version of NT (I forget
the vendor's name). How do you figure out which interrupt on the PCI bus is
mapped to which interrupt in the PIC so that you can hook the interrupt to
your own code?

Thanks,




Rick Collins


reDSP - A Signal Processing Solutions Company

redsp@usa.net

reDSP
4 King Ave
Frederick, MD 21701-3110
301-682-7772 Voice
301-682-7666 FAX