[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
PCIRf: How to access PCI Exp. cards in DOS
- To: Mailing List Recipients <pci-sig-request@znyx.com>
- Subject: PCIRf: How to access PCI Exp. cards in DOS
- From: Keith Jasinski <jasinski@mortara.com>
- Date: Wed, 31 Mar 1999 08:54:45 -0600
- Delivered-To: pcisig@teleport.COM
- Resent-Date: Wed, 31 Mar 1999 07:39:04 -0800
- Resent-From: pci-sig-request@znyx.com
- Resent-Message-ID: <"XpOW32.0.1x7.7TZ0t"@electra.znyx.com>
- Resent-Sender: pci-sig-request@znyx.com
I am looking for any information (either direct information or good book
recommendations) on how to access PCI cards in DOS (command prompt only,
not a console window with a Windows driver). I am looking to learn how
to find the cards on the bus (I believe the BIOS enumerates the bus on
power up, so that info is somewhere), perform configuration cycles, and
memory accesses.
Thanks in advance,
Keith
Keith F. Jasinski, Jr.
jasinski@mortara.com
Extension 245
Mortara Instrument, Inc. (www.mortara.com)
7865 North 86th Street
Milwaukee, WI 53224
(414) 354-1600