[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

PCI clock line length

To: Mailing List Recipients <pci-sig-request@znyx.com>
Subject: PCI clock line length
From: Pieter de Kock <Pieter.deKock@DataVoice.co.za>
Date: Mon, 11 Oct 1999 15:19:19 +0200
Sender: owner-reflector@www.pcisig.com

Most PCI products I have seen seem to disregard the specification for PCI
clock line length.  The lines are usually far shorter then 2.5 inches.  What
is the best policy: follow the specification (and risk a mismatch with all
the too-short clocks on adjacent cards) or emulate the competition and
therefore perpetrate the incorrect standard?
Regards
Pieter de Kock


> Pieter de Kock  (Hardware design engineer)
> DataVoice (Pty) Ltd, PO Box 582, Stellenbosch, 7599, South Africa
> Tel : +27 (21) 888-2045   Fax : +27 (21) 888-2200
> Email : pieter.dekock@datavoice.co.za
http://www.datavoice.co.za

Prev by Date: ISA Retainer
Next by Date: LP-PCI Spec.
Prev by thread: Bus numbering
Next by thread: Re: PCI clock line length
Index(es):
- Date
- Thread