[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

PMC Signals BUSMODE

To: Mailing List Recipients <pci-sig-request@znyx.com>
Subject: PMC Signals BUSMODE
From: Mahler Willi <Willi.Mahler@icn.siemens.de>
Date: Tue, 12 Oct 1999 14:13:31 +0200
Sender: owner-reflector@www.pcisig.com

We are designing a PCI Board with a local PCI bus (32 bit). The board should
have the possibily to expand with a PCI to Mezzanine Card. I have the IEEE
Draft Std. P1386.1 / Draft 2.0 and there is a connector recommended.

Question:
There are four signals BUSMODE0# to BUSMODE3# at the PMC connector. To which
signals of the PCI Card Edge connector to they correspond?

Best regards

Willi Mahler

Siemens AG
DC HS
Werner-von-Siemens-Str.2-6
76646 Bruchsal
Tel. +49 7251 73 3330
Fax. +49 7251 73 3720
mailto:willi.mahler@icn.siemens.de

Follow-Ups:
- Re: PMC Signals BUSMODE
  - From: "Lorne J. Levinson" <Lorne.Levinson@weizmann.ac.il>

Prev by Date: LP-PCI Spec.
Next by Date: Re: PMC Signals BUSMODE
Prev by thread: LP-PCI Spec.
Next by thread: Re: PMC Signals BUSMODE
Index(es):
- Date
- Thread