RE: Compliance?? Thanks

[Rob LaMoreaux <RLaMoreaux@BTE-US.com>]

Thanks to all who replied. 

This will give me ammo to our supplier and my management (who killed the
version of this board I designed two years ago, because they didn't want
to do drivers).

Robert D. LaMoreaux
BT Electronics LLC
459 E. cady
Northville, MI 48167
Phone:(248)-449-8284
Fax:(248)-449-2577
Email:RLaMoreaux@bte-us.com
Alternate Email:Rob_LaMoreaux@compuserve.com



> -----Original Message-----
> From: pci-sig-request@znyx.com [mailto:pci-sig-request@znyx.com]On
> Behalf Of Rob LaMoreaux
> Sent: Monday, November 22, 1999 4:55 PM
> To: Mailing List Recipients
> Subject: Compliance??
> 
> 
>  
> We have recently purchased an add-on board that is supposed to be PCI
> compliant (at least that is what it is advertised as). I noticed that
> the CLK trace is NOT 2.5 inches long, and there is no bypassing on the
> unused 3.3V power. I thought these both were required for PCI
> Compliance. Did something change, or is the board non-compliant. 
> 
> Also this board is marked CE. Does the non-compliance effect 
> the boards
> CE compliance?
> 
> Robert D. LaMoreaux
> BT Electronics LLC
> 459 E. cady
> Northville, MI 48167
> Phone:(248)-449-8284
> Fax:(248)-449-2577
> Email:RLaMoreaux@bte-us.com
> Alternate Email:Rob_LaMoreaux@compuserve.com
> 
>