RE: Relation between PCI rev 2.2 and HOT SWAP

[Lame Brooks-G14738 <Brooks_Lame@mcg.mot.com>]

PCI Hotswap is different from CompactPCI Hot Swap in that power controlling
functions are located on the system board instead of on the add-in card; so,
the signals are not defined on the PCI bus connector.  It sounds like you
need the PCI SIG published PCI Hot Swap Spec.
-- BrooksL

> -----Original Message-----
> From: Mun Loh [mailto:mun.loh@infineon.com]
> Sent: Monday, 06 December, 1999 11:39
> To: Mailing List Recipients
> Subject: Relation between PCI rev 2.2 and HOT SWAP
> 
> 
> Hi,
> 
> After browsing thru both the spec., there are a few signals that are
> used
> on the Compact PCI's HOT SWAP which are not present on PCI rev 2.2
> Currently, I am implementing the HOT SWAP option for my PCI rev. 2.2
> design. It seems that the CAP_ID = 06 is ready for HOT SWAP.
> But the pyhsical PCI bus does not have the ENUM# signal and 
> others.....
> Can you kindly direct me,  of how we will can implement the HOT SWAP
> capability on a PCI rev 2.2 bus??
> Your time is very much appreciated.
> 
> Thank you,
> Mun Sing
> 
> Infineon Technologies, Inc.
> 1730 N. First Street
> San Jose, CA  95112
> U.S.A
> 
> 
>