RE: Relation between PCI rev 2.2 and HOT SWAP

[Mun.Loh@infineon.com]

Hi Brook,

Thanks for the information.
By the way, do you mean "PCI HOT-PLUG rev 1.0"??

Regards,
MunSing

> -----Original Message-----
> From:	Lame Brooks-G14738 [SMTP:Brooks_Lame@mcg.mot.com]
> Sent:	Monday, December 06, 1999 12:33 PM
> To:	'PCISIGList'
> Cc:	'Mun Loh'
> Subject:	RE: Relation between PCI rev 2.2 and HOT SWAP
> 
> PCI Hotswap is different from CompactPCI Hot Swap in that power controlling
> functions are located on the system board instead of on the add-in card; so,
> the signals are not defined on the PCI bus connector.  It sounds like you
> need the PCI SIG published PCI Hot Swap Spec.
> -- BrooksL
> 
> > -----Original Message-----
> > From: Mun Loh [mailto:mun.loh@infineon.com]
> > Sent: Monday, 06 December, 1999 11:39
> > To: Mailing List Recipients
> > Subject: Relation between PCI rev 2.2 and HOT SWAP
> > 
> > 
> > Hi,
> > 
> > After browsing thru both the spec., there are a few signals that are
> > used
> > on the Compact PCI's HOT SWAP which are not present on PCI rev 2.2
> > Currently, I am implementing the HOT SWAP option for my PCI rev. 2.2
> > design. It seems that the CAP_ID = 06 is ready for HOT SWAP.
> > But the pyhsical PCI bus does not have the ENUM# signal and 
> > others.....
> > Can you kindly direct me,  of how we will can implement the HOT SWAP
> > capability on a PCI rev 2.2 bus??
> > Your time is very much appreciated.
> > 
> > Thank you,
> > Mun Sing
> > 
> > Infineon Technologies, Inc.
> > 1730 N. First Street
> > San Jose, CA  95112
> > U.S.A
> > 
> > 
> >