[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Fw: Subsystem Vendor ID
By hardware wired I mean it is fixed in any ROM system and only can be read,
Micro Memory Inc.
Chartworth, CA 91311, US.
----- Original Message -----
> From: Mikhail Matusov <email@example.com>
> To: <firstname.lastname@example.org>
> Sent: Monday, July 10, 2000 2:34 PM
> Subject: Re: Subsystem Vendor ID
> > ----- Original Message -----
> > From: Weng <email@example.com>
> > To: <firstname.lastname@example.org>
> > Sent: Sunday, July 09, 2000 5:08 PM
> > Subject: Re: Subsystem Vendor ID
> > >
> > > Hi,
> > > Vendor ID/Subsystem ID is hardware wired.
> > > Actually there is no feasible hardware method to modify what you
> > > do.
> > >
> > In most of modern PCI chips it is loadable from an EEPROM as Lloyd
> > mentioned earlier. I've done this many times.
> > It could've been hardwired in older chips and at least in some older
> > Subsystem IDs were not implemented at all.
> > ============================
> > Mikhail Matusov
> > Hardware Design Engineer
> > Square Peg Communications
> > Tel.: 1 (613) 271-0044 ext.231
> > Fax: 1 (613) 271-3007
> > http://www.squarepeg.ca