[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

PCI PCB Specification

To: "'pci-sig@znyx.com'" <pci-sig@znyx.com>
Subject: PCI PCB Specification
From: Mike Jones <Mike.Jones@renishaw.com>
Date: Wed, 2 Aug 2000 07:26:01 +0100
Registered_Office: New Mills, Wotton-Under-Edge, Glos, GL12 8JR, UK
Renishaw_PLC: Registered Number 1106260, England
Sender: owner-reflector@www.pcisig.com

We have been advised by our PCB manufacturer that they cannot meet the
tolerances defined for the PCB profile laid down in the PCI Specification.
This is mainly relating to the slot in the connector fingers (1.8mm)

Prev by Date: PCI compliance for tristate output buffers
Next by Date: PCI PCB Specification
Prev by thread: PCI compliance for tristate output buffers
Next by thread: PCI PCB Specification
Index(es):
- Date
- Thread