Re: PCI 66MHz mode

[Neal Palmer <neal@dinigroup.com>]

It sounds like you are attempting to plug a 33Mhz card into a 66Mhz PCI
bus?

If you are, then plugging in the 33Mhz card will slow down the 66Mhz bus
to 33Mhz.

And why are you putting resistors on the PCI bus signals?

On Thu, 28 Sep 2000, Goran Grbic wrote:

> I am brand new member and don't know if this is proper way to obtain
> information.
> 
> Looking for experiences on using 66MHz PCI mode.  Our application would
> require to put 0 ohm resistors on the bus to separate two different
> paths (direct PCI and PCI to PCI PLX 9030 target) we have to satisfy.
> 
> Regards, 
> 
> Goran Grbic
> Application Hardware Engineer
> MOSAID Tech.
> Kanata, Ont.
> K2K 2X1, Canada
> 

-- Neal Palmer

The Dini Group
1010 Pearl St #6
La Jolla, CA 92037
(858) 454-3419 x16
(858) 454-1728 (Fax)