[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

PC reset

I am using PLX9030 with Microchip 93LC56B EEPROM on PCI bus, going
through Universal PCI connector.  When I program the EEPROM, PC doesn't
want to boot (it looks like it is not going out of RESET); 

When I apply probe on PCI RST signal (1Mohm; couple of pF capacitance)
PC start to boot properly.

Any experience on this?


Goran Grbic
Apps Eng.
613-599-9539, ext. 1481