Re: Arbitration pin requirements

[fmnemeth@collins.rockwell.com]

I would think that as long as you're TTL-level compliant on REQ and GNT,
you should be ok. Same story with CLKs, if you're running them
point-to-point.
mike nemeth
Rockwell Collins, Inc.

{Expressed herein is my opinion and not that of Rockwell Collins, Inc.}



                                                                                                
                    James Murray                                                                
                    <jmurray@tris        To:     PCI SIG <pci-sig@znyx.com>                     
                      cend.com>          cc:                                                    
                                         Subject:     Arbitration pin requirements              
                      03/21/01                                                                  
                      10:40 AM                                                                  
                                                                                                
                                                                                                




Hello

Dilemna: I would like to build a PCI arbiter in a part that does not
have PCI-compliant I/Os. Is this possible, given that the arbitration
signals are point-to-point, or do the pins have to be PCI compliant.

James