[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

VIO pin connection

To: pci-sig@znyx.com
Subject: VIO pin connection
From: Raj Gandhi <raj.gandhi@qlogic.com>
Date: Wed, 18 Apr 2001 10:23:28 -0700
Sender: owner-reflector@www.pcisig.com


Is it Ok to connect VIO pins of a 3.3v ASIC
that has 5v input tolerant PCI pads to connect
to +5v supply (through a resistor) instead of
VIO pins of a PCI connector.

Any opinions ?

Thanks

Prev by Date: RE: Purposeful Parity control
Next by Date: 64bit 66MHz PCI chip
Prev by thread: Header Type Register
Next by thread: RE: VIO pin connection
Index(es):
- Date
- Thread