[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Can you use a 66MHz PCI device on AGP?

To: pci-sig@znyx.com
Subject: Can you use a 66MHz PCI device on AGP?
From: Robert Lindsell <robertl@research.canon.com.au>
Date: Thu, 03 May 2001 11:01:08 +1000
Organization: Canon Information Systems Research Australia
References: <3.0.5.32.20010501105828.00a0d2a0@znyx.com>
Sender: owner-reflector@www.pcisig.com

Hi,

According to the AGP Spec baseline (1x) AGP is basically PCI 66MHz. Does
anyone know if it's possible to use an unmodified 66MHz PCI device in an
AGP slot? (assuming you mounted it on an AGP form-factor board)

If so, are there any adapter boards that allow you to plug a 66MHz PCI
board into an AGP socket?

Thanks,

Robert

-- 
Robert Lindsell, Senior Hardware Engineer
Canon Information Systems Research Australia
PO Box 313 NORTH RYDE NSW 2113  mailto:robertl@research.canon.com.au
Fax:   +61-2-9805-2929 Phone: +61-2-9805-2876

Follow-Ups:
- RE: Can you use a 66MHz PCI device on AGP?
  - From: "Adam Barnes" <adam@varisys.co.uk>

References:
- Pci-sig mailing list administrative note
  - From: Daniel Weaver <dan.weaver@znyx.com>

Prev by Date: Re: Thunder HEsl S2567 / PCI 64 - 66MHz
Next by Date: RE: Can you use a 66MHz PCI device on AGP?
Prev by thread: Pci-sig mailing list administrative note
Next by thread: RE: Can you use a 66MHz PCI device on AGP?
Index(es):
- Date
- Thread