[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IRQ and 21554.




 
 Hi
 
 I am using a 21554 as Pci Bridge.
 I use software IRQ of the 21554 to exchange IRQ between the 
 primary and the
 scondary side of the 21554.
 
 But on the secondary side, I have got IRQ that comes from a 
 PMC. As this IRQ
 is connected on the s_int_a of the 21554 it goes through the 
 bridge and I
 found my IRQ on the primary bus.
 Is it possible to prevent this ?
 
 I want the PMC IRQ to be seen only by the secondary side, I 
 can't connect my
 PMC IRQ on int_b, int_c or int_d, I need the 21554 to allow 
 the software
 IRQ...
 
 Thanks.
 
 Chris