RE: PCI Interrupt and Acknowledgement

["John Bloomfield" <john@datacube.com>]

Please remove John Bloomfield (john@datacube.com) from your mailing list, as
he no longer works at Datacube.

Thank you.

-----Original Message-----
From:	tjm@codegen.com [mailto:tjm@codegen.com] On Behalf Of Thomas J.
Merritt
Sent:	Monday, February 04, 2002 9:43 AM
To:	I. Servan Uzun
Cc:	pci-sig@znyx.com
Subject:	Re: PCI Interrupt and Acknowledgement

|<><><><><> Original message from "I. Servan Uzun"  <><><><><>
|Hi,
|
|I am using Altera' s 64-bit 66MHz PCI Megacore in my project.
|I implemented an interrrupt & acknowledgement logic as follows,
|
|    1-) When the process is completed, an interrupt signal is
|generated and fed to pci megacore function.
|    2-) When my software that is running on the computer catches the
|pci interrrupt, it sets a predefined bit of a register (in fpga) in order
to
|acknowledge the interrupt.
|    3-) When I check this timing by a logic analyzer, I found that it is
|8 microseconds between the rising edge of the interrupt signal and the
|rising edge of int-acknowledge signal. This means that it takes 8 usec
|to acknowledge the interrupt.
|
|My question is that is this time is normal or long?

I would say that this is pretty normal.  It depends upon a number of
factors, like the type and speed of CPU, the type and speed of memory, the
host bridge chipset and most importantly the operating system that you are
using and the design of your device driver.
|                                                    Is it possible to
shorten
|this interrupt acknowledgement time?

It depends upon how many of the above variables you can control.  I would
not expect too much though.  Interrupt service routines are likely to miss
in cache when accessing memory and these cache misses are costly.  The fewer
memory or PCI accesses you do in your device driver the shorter your
interrupt latency will be in the typical case.  Worst case interrupt latency
can be substantially longer than 8us and you may need to size FIFOs
accordingly in order for your device to function propertly.
TJ Merritt
tjm@codegen.com
1-415-834-9111