[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Agilent E2928A PCI analyzer with serial port...

To: "PCI SIG Mailing List" <pci-sig@znyx.com>
Subject: Agilent E2928A PCI analyzer with serial port...
From: "Austin Franklin" <darkroom@ix.netcom.com>
Date: Fri, 15 Mar 2002 21:16:11 -0500
Importance: Normal
Resent-Date: Fri, 15 Mar 2002 18:35:59 -0800
Resent-From: pci-sig@znyx.com
Resent-Message-ID: <1eqQPB.A.c1B.L4qk8@electra>
Resent-Sender: pci-sig-request@znyx.com

Has anyone successfully gotten the E2928A PCI analyzer card to work over the
serial port on either W2k or NT?  I am able to get the software to recognize
the board is on that port...but nothing else works past that reliably.  The
documentation doesn't mention if they use any flow control, the
documentation just says 8N1...  I've tried it with none, HW and SW...none
are any better.  My cables buzz out fine.

Thank you,

Austin Franklin
austin@darkroom.com

Prev by Date: PCI crashes in Spartan II FPGA
Next by Date: Re: PCI design in Xilinx Spartan II is intermittently crashing
Prev by thread: PCI crashes in Spartan II FPGA
Next by thread: Re: Agilent E2928A PCI analyzer with serial port...
Index(es):
- Date
- Thread