[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: PCI Spec and Jumpers

To: "Bill Franklin III" <bfranklin@bb-elec.com>
Subject: RE: PCI Spec and Jumpers
From: "Ingraham, Andrew" <Andrew.Ingraham@compaq.com>
Date: Mon, 18 Mar 2002 15:37:17 -0500
Cc: "pci-sig" <pci-sig@znyx.com>
Resent-Date: Mon, 18 Mar 2002 12:55:09 -0800
Resent-From: pci-sig@znyx.com
Resent-Message-ID: <1U0XZD.A.5jF.rMll8@electra>
Resent-Sender: pci-sig-request@znyx.com
Thread-Index: AcHN/OMv8xMPr21rRr6X9jqVjRILJgAshKdAAAMrhlU=
Thread-Topic: PCI Spec and Jumpers

> 1.Does the PCI Spec specifically state that a card can't have jumpers on
> it? 
 
The PCI Spec says nothing about jumpers on your card.  If they don't affect the PCI bus, that is your side of the interface.

Remember that PCI is not limited to Microsoft operating systems, nor to X86 hardware.

Andy

Prev by Date: PCI Spec and Jumpers
Next by Date: RE: about Intel's FW21154-BE
Prev by thread: PCI Spec and Jumpers
Next by thread: conclusion
Index(es):
- Date
- Thread