Is the following Spartan-II FG456 package LogiCORE PCI pinout correct?

["Kevin Brace" <kevinbraceusenet@hotmail.com>]

Hi, I will like to know if the following pinout is the correct pinout 
LogiCORE PCI uses for a Spartan-II FG456 package.
I copied off a schematics I found from some website, however, the 
application was using LogiCORE PCI as a host bridge, so I am not sure if the 
pinout is correct for use in a PCI expansion card.
The Xilinx doesn't seem to want to give out pinout information LogiCORE PCI 
uses unless I pay them several thousand dollars for a LogiCORE PCI license.
I am poor and I did (doing) my own PCI IP core, so I have no intention of 
licensing LogiCORE PCI.
However, I still want to use the same pinout Xilinx used because use of a 
different pinout can adversely affect timings.
Here is the pinout I copied off the schematics I am talking about.



________________________________________________________________
NET "CLK" LOC = "C11";
NET "RST_n" LOC = "F5";
NET "AD<63>" LOC = "Y16";
NET "AD<62>" LOC = "V15";
NET "AD<61>" LOC = "AB17";
NET "AD<60>" LOC = "AB16";
NET "AD<59>" LOC = "Y15";
NET "AD<58>" LOC = "AA15";
NET "AD<57>" LOC = "AB15";
NET "AD<56>" LOC = "V14";
NET "AD<55>" LOC = "AA14";
NET "AD<54>" LOC = "V13";
NET "AD<53>" LOC = "Y13";
NET "AD<52>" LOC = "AA13";
NET "AD<51>" LOC = "AB13";
NET "AD<50>" LOC = "AA12";
NET "AD<49>" LOC = "Y12";
NET "AD<48>" LOC = "U12";
NET "AD<47>" LOC = "AB11";
NET "AD<46>" LOC = "W11";
NET "AD<45>" LOC = "V11";
NET "AD<44>" LOC = "Y10";
NET "AD<43>" LOC = "AB10";
NET "AD<42>" LOC = "W10";
NET "AD<41>" LOC = "Y9";
NET "AD<40>" LOC = "AB9";
NET "AD<39>" LOC = "V9";
NET "AD<38>" LOC = "AA8";
NET "AD<37>" LOC = "Y8";
NET "AD<36>" LOC = "W8";
NET "AD<35>" LOC = "W7";
NET "AD<34>" LOC = "AA7";
NET "AD<33>" LOC = "AB6";
NET "AD<32>" LOC = "AB5";
NET "AD<31>" LOC = "G5";
NET "AD<30>" LOC = "F3";
NET "AD<29>" LOC = "E2";
NET "AD<28>" LOC = "E1";
NET "AD<27>" LOC = "H5";
NET "AD<26>" LOC = "F2";
NET "AD<25>" LOC = "F1";
NET "AD<24>" LOC = "H4";
NET "AD<23>" LOC = "H2";
NET "AD<22>" LOC = "J5";
NET "AD<21>" LOC = "J2";
NET "AD<20>" LOC = "K5";
NET "AD<19>" LOC = "K1";
NET "AD<18>" LOC = "K3";
NET "AD<17>" LOC = "K4";
NET "AD<16>" LOC = "L6";
NET "AD<15>" LOC = "P2";
NET "AD<14>" LOC = "P4";
NET "AD<13>" LOC = "P3";
NET "AD<12>" LOC = "R2";
NET "AD<11>" LOC = "T1";
NET "AD<10>" LOC = "R4";
NET "AD<9>" LOC = "T2";
NET "AD<8>" LOC = "U1";
NET "AD<7>" LOC = "U2";
NET "AD<6>" LOC = "T3";
NET "AD<5>" LOC = "T4";
NET "AD<4>" LOC = "W1";
NET "AD<3>" LOC = "U4";
NET "AD<2>" LOC = "Y1";
NET "AD<1>" LOC = "W2";
NET "AD<0>" LOC = "Y2";
NET "C_BE_n<7>" LOC = "Y6";
NET "C_BE_n<6>" LOC = "AA4";
NET "C_BE_n<5>" LOC = "W6";
NET "C_BE_n<4>" LOC = "Y7";
NET "C_BE_n<3>" LOC = "G1";
NET "C_BE_n<2>" LOC = "L1";
NET "C_BE_n<1>" LOC = "N4";
NET "C_BE_n<0>" LOC = "R5";
NET "PAR" LOC = "N3";
NET "IDSEL" LOC = "H3";
NET "FRAME_n" LOC = "L4";
NET "IRDY_n" LOC = "L3";
NET "DEVSEL_n" LOC = "M3";
NET "TRDY_n" LOC = "M1";
NET "STOP_n" LOC = "M4";
NET "PERR_n" LOC = "M5";
NET "SERR_n" LOC = "N2";
NET "REQ_n" LOC = "D2";
NET "GNT_n" LOC = "B1";
NET "INTA_n" LOC = "E3";
NET "M66EN" LOC = "R1";
NET "REQ64_n" LOC = "V7";
NET "ACK64_n" LOC = "W3";
NET "PAR64" LOC = "AA5";
________________________________________________________________





Thanks,



Kevin Brace

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.