Re:64bit PCI card

[nimit.endlay@st.com]

The problem may be because of the pins which are 
not properly driven.Normally when you are mapping a
design on a FPGA make all undriven pins as inputs
tristated.If this is not done then there is quite
a possibility of the problem which you are currently
facing

rgds
Nimit Endlay

Design Engineer
ST Microelectronics.


! ** Proprietary **
! 
! Hi 
! 
! We have PCI 64-bit/66MHz Add in card.This board is designed for
protyping  and w
! e have achieved the set-up time of 3ns with total clock frequency of
15ns as PCI
!  2.2 Spec.
! 
! We are a facing a problem ,let me explain u in brief manner,the 64 bit
pci card 
! when we insert to PC mother board (configuration are 133MHz,64MM RAM,20
GB HDD,i
! ntel mother board  & Pentium Processor )to verify for 32-bit and 33MHz
the momen
! t we insert the card PC is getting switched off.Please help suggestions
and solu
! tions are most welcome.
! 
! Please do reply at the earliest possible
! 
! Thanks & Regards
! <>Velu.V
! Design Engineer - EmSyS
! Larsen & Toubro Ltd
! Mysore works - INDIA
! 
! 
! 
!