[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: low cost PCI to local bus bridge

To: "Langus Matevz ITWEH-zunanji" <langus@iskratel.si>, <pci-sig@znyx.com>
Subject: Re: low cost PCI to local bus bridge
From: "Peter Marek" <peter.marek@marekmicro.de>
Date: Wed, 6 Nov 2002 16:31:49 +0100
References: <6DB07DE0DFC1254BB765A1BFE1C18AADB03241@ntmail.iskratel.si>
Resent-Date: Wed, 6 Nov 2002 07:44:36 -0800
Resent-From: pci-sig@znyx.com
Resent-Message-ID: <i3Y5UC.A.2RF.PeTy9@electra>
Resent-Sender: pci-sig-request@znyx.com

Try QuickLogic QuickPCI parts. Saves you glue Logic on the backend.
These are FPGAs with PCI hard macros on a chip. We have reference IP for an
8bit backend bus available.

regards,

Peter Marek
General Director
MarekMicro GmbH
tel.: 049-9621-9732-110
fax: 049-9621-9732-199
www.marekmicro.de

----- Original Message -----
From: "Langus Matevz ITWEH-zunanji" <langus@iskratel.si>
To: <pci-sig@znyx.com>
Sent: Wednesday, November 06, 2002 4:07 PM
Subject: low cost PCI to local bus bridge


> Dear experts,
>
> can anyone recommend a very low cost PCI 2.2 (target only) bridge to local
> bus (very simple, Motorola or Intel like, can be 8 bits wide).
>
> thanks and best regards,
>   Matevz Langus
>

References:
- low cost PCI to local bus bridge
  - From: Langus Matevz ITWEH-zunanji <langus@iskratel.si>

Prev by Date: low cost PCI to local bus bridge
Next by Date: Re: compact PCI clock distribution
Prev by thread: low cost PCI to local bus bridge
Next by thread: RE: low cost PCI to local bus bridge
Index(es):
- Date
- Thread