[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Low cost PCI to local bus bridge
Matevz, take a look at the PCI-ISA-001 controller form ISS (www.iss-us.com). I don't have experience with this device
but it looks like it will meet your requirements.
From: Vashek Weis [mailto:email@example.com]
Sent: Wednesday, November 06, 2002 8:11 PM
Subject: Re: Low cost PCI to local bus bridge
Check the PLX PCI 9030: http://www.plxtech.com/products/9030/default.htm.
"Low cost" is relative term, Yahoo Store price list is $18 for PQFP package
or $21 for uBGA package but you may get it cheaper in quantities. You may
configure the local bus for 8, 16 or 32 bit operation and usually no glue
logic is required since the device generates four chip selects and the
local bus is very flexible.
>From: Langus Matevz ITWEH-zunanji <firstname.lastname@example.org>
>To: email@example.com <firstname.lastname@example.org>
>Subject: low cost PCI to local bus bridge
>Date: Wed, 6 Nov 2002 16:07:43 +0100
>can anyone recommend a very low cost PCI 2.2 (target only) bridge to local
>bus (very simple, Motorola or Intel like, can be 8 bits wide).
>thanks and best regards,
Standard Products FAE
Advanced Semiconductor Technology Ltd.
3 Hazan St., Ra'anana, 43563, Israel
Tel: 972-9-7744278 Ext. 332
When everything else fails, read the documentation.
This footnote confirms that all messages sent out from AST are checked
against Computer Viruses.
Antivirus protection is never 100% safe. Be careful and don't get caught by
Report problems to mailto:Postmaster@ast.co.il
For AST email suppression rules: