[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Header type of Card bus to PCI bridge

To: pci-sig@znyx.com
Subject: Header type of Card bus to PCI bridge
From: Gopal Gupta <gopalgu@yahoo.co.in>
Date: Mon, 18 Nov 2002 10:47:07 +0000 (GMT)
Resent-Date: Mon, 18 Nov 2002 03:01:27 -0800
Resent-From: pci-sig@znyx.com
Resent-Message-ID: <MxC0hB.A._DD.kdM29@electra>
Resent-Sender: pci-sig-request@znyx.com

Hi,

Is there a standard chip available in the market that bridges between a Card bus (Primary bus) and a PCI bus ( secondary bus ) ?

What will be the Header Type for such a device - Type 0, Type 1 or Type 2. I understand that Type 0 is for Card bus cards, Type 1 is for PCI to PCI bridge and type 2 for PCI to card bus bridge. But I feel that the above bridge is not falling in any of these catagories it is a Card bus to PCI bridge !!

Regards

Gopal

Catch all the cricket action. Download Yahoo! Score tracker

Prev by Date: RE: Generation of RST# at System Power Down
Next by Date: PCI-to-IDE
Prev by thread: Re: PCI-to-IDE
Next by thread: Interrupt Disable bit
Index(es):
- Date
- Thread