Re: PCI Clock arising problem

["Venkateshwarlu V" <venkateshwarluv@myw.ltindia.com>]

** Proprietary **

Hi,
Check the PRSNT signals.


Venkat

>>> "Mayank Sharma" <mayank.sharma@wipro.com> 01/09/03 07:01PM >>>
Hi All , 

I am using a PCI daughter card ,If I insert that card into 5V PCI Slot , PCI Clock is not seen in the Logic Analyzer or Oscilloscope , even if we remove the FPGA from the board .....then I see the clock comming up for a short time and then goes off ....afterwards.

If I insert some other daughter card into this same PCI Slot , I can see the PCI Clock , comming to the board....

Can any one help me out in knowing the possiblity of this clock problem I am facing 

thanks and regards
Mayank